{"product_id":"tuolauthon-straight-id-2-5-to-3-inch-silicone-reducer","title":"TuoLauthon Straight ID 2.5 to 3 inch Silicone Reducer","description":"\u003cp\u003e\u003cstrong\u003eTuoLauthon’s Straight ID 2.5 to 3 inch silicone reducer coupler is a 5‑ply, 6mm‑wall high‑temperature hose designed to join 63mm to 76mm pipes for intake, intercooler, turbo or exhaust plumbing with two stainless T‑bolt clamps included.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis high‑performance silicone reducer provides a compact, durable connection between slightly mismatched tubes. Built with five reinforcing layers and a thick 6mm wall, it resists heat, ozone and pressure spikes typical in turbo and charge‑air systems. The straight 4‑inch length keeps installations tidy where space is limited, and two stainless T‑bolt clamps are supplied so you can clamp the joint securely without sourcing extra hardware.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this silicone reducer handle high temperatures and pressure?\u003c\/h3\u003e\n\u003cp\u003eDesigned for extreme operating conditions, the TuoLauthon reducer tolerates a wide temperature range and holds significant internal pressure thanks to its multilayer build. It’s engineered to maintain flexibility at low temperatures while resisting softening at elevated temperatures common near turbos and exhaust components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking temperature: -76°F (-60°C) to +500°F (+260°C)\u003c\/li\u003e\n  \u003cli\u003eWorking pressure range: 0.3–1.5 MPa (43.5–217.5 PSI)\u003c\/li\u003e\n  \u003cli\u003eBursting pressure: 2.0 MPa for enhanced safety margin\u003c\/li\u003e\n  \u003cli\u003e5‑ply reinforcement plus 6mm wall thickness for pressure resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my 2.5 inch to 3 inch piping layout?\u003c\/h3\u003e\n\u003cp\u003eThe reducer’s ID transitions from 2.5 inches (63mm) to 3 inches (76mm) and its straight 4‑inch (102mm) length makes it suitable for short joins where a smooth internal bore is needed. Measure your coupling area and needed hose length to confirm clearance and clamp placement before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner diameters: 63mm → 76mm for direct mismatch joins\u003c\/li\u003e\n  \u003cli\u003eLength: 102mm (4 inches) for compact installs\u003c\/li\u003e\n  \u003cli\u003eIncludes two stainless T‑bolt clamps sized for both ends\u003c\/li\u003e\n  \u003cli\u003eNot recommended for oil or fuel transfer—use for air\/water\/gas applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what hardware is included?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: slide the reducer over the mating pipes and tighten the provided T‑bolt clamps for a secure, leak‑resistant seal. The clamps are stainless steel for corrosion resistance in marine and outdoor environments, removing the need to buy separate fasteners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne reducer plus two stainless T‑bolt clamps included\u003c\/li\u003e\n  \u003cli\u003eClamps give even compression and high clamping force\u003c\/li\u003e\n  \u003cli\u003eFits typical intake\/intercooler\/turbo pipe flanges without welding\u003c\/li\u003e\n  \u003cli\u003eReinforced layers reduce chance of collapse under vacuum\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere is this silcone coupler best used and what should I avoid?\u003c\/h3\u003e\n\u003cp\u003eThis reducer excels in charge‑air, intake and intercooler plumbing, as well as some exhaust or fresh‑air ducting where heat and pressure are factors. It is ozone and UV resistant for outdoor use but is not formulated for fuel or oil transfer—select a fluid‑rated line for those applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal for turbo, intercooler and intake tubing connections\u003c\/li\u003e\n  \u003cli\u003eUV and ozone resistant for durability outdoors and marine use\u003c\/li\u003e\n  \u003cli\u003eNot for oil, gasoline or other liquid fuel transfer\u003c\/li\u003e\n  \u003cli\u003eWorks for industrial compressed‑air or water lines within specs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The TuoLauthon 2.5→3 inch silicone reducer is for mechanics, tuners, fabricators and DIY enthusiasts who need a compact, heat‑tolerant transition between slightly different pipe sizes. Choose it when you need a rugged, pre‑clamped solution for intake, intercooler, turbo or charge‑air systems where high temperature resistance and pressure handling are required but fuel compatibility is not.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this reducer come with clamps?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — one reducer includes two stainless steel T‑bolt clamps sized for both ends, so no extra clamps are needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this for fuel or oil lines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — this silicone coupler is not rated for oil or fuel transfer; use it for air, intercooler, turbo and similar non-fuel applications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TuoLauthon","offers":[{"title":"Default Title","offer_id":48087125655710,"sku":"B0FLJTBWQ6","price":33.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/tuolauthon-front-packaging-reducer-coupler_8d885325-e690-4eec-96ac-5b9d7725b21c.jpg?v=1785917285","url":"https:\/\/northtrailauto.ca\/products\/tuolauthon-straight-id-2-5-to-3-inch-silicone-reducer","provider":"North Trail Auto","version":"1.0","type":"link"}