{"product_id":"tusk-fork-dust-seal-rebuild-kit-for-crf110f-125f-xr150l-ttr110e-complete-fork-seals-foam-rings-dust-boots","title":"TUSK Fork \u0026 Dust Seal Rebuild Kit for CRF110F\/125F\/XR150L\/TTR110E — Complete fork seals, foam rings, dust boots","description":"\u003cstrong\u003eComplete front-fork seal and rebuild kit engineered to replace worn seals, foam rings, and dust covers for compatible small-displacement motorcycles.\u003c\/strong\u003e\n\n\u003cp\u003eIf your bike’s front end leaks oil, feels inconsistent, or has degraded travel, the right seal kit restores reliable fork performance without a full fork replacement. The TUSK Fork \u0026amp; Dust Seal Kit gathers all internal wear pieces you typically change during a front-fork service, so you can address leaks, contamination, or sag in a single maintenance session. This kit is made to fit specific Honda and Yamaha models and includes parts matched to original internal dimensions for a direct, streamlined installation.\u003c\/p\u003e\n\n\u003ch3\u003eWhat exactly comes in this rebuild kit and why does each piece matter?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains the replaceable fork seals, dust boots, inner foam rings, and the small hardware required to rebuild a fork leg. Each component has a targeted role: seals stop oil loss, dust covers block dirt, foam rings retain lubricating oil, and hardware secures the assembly. Replacing everything at once prevents early failures caused by mixed old and new parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrimary fork oil seals sized to match OEM internal diameters\u003c\/li\u003e\n  \u003cli\u003eWeather-resistant dust covers to keep grit out of the fork internals\u003c\/li\u003e\n  \u003cli\u003eFoam rings that help maintain lubrication and smooth travel\u003c\/li\u003e\n  \u003cli\u003eIncluded fasteners and any small components needed for reassembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools or steps should I expect?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with routine motorcycle maintenance and basic tools. You’ll disassemble the fork leg, remove old seals and foam, fit the new parts, refill with the correct fork oil, and reassemble following torque specs from your service manual. No specialized machining is required, though a clean workspace and adherence to the manual improve outcomes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires common hand tools, torque wrench recommended\u003c\/li\u003e\n  \u003cli\u003eFork oil must be chosen per your motorcycle’s service manual\u003c\/li\u003e\n  \u003cli\u003eClean parts and organized workspace reduce risk of contamination\u003c\/li\u003e\n  \u003cli\u003eProfessional shop service advised if you’re unsure about fork disassembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich motorcycles does this TUSK kit fit and how can I verify compatibility?\u003c\/h3\u003e\n\u003cp\u003eThe kit lists compatibility with a range of small-displacement Honda and Yamaha models across multiple years; exact fitment depends on your bike’s model and production year. Use the included fitment guide image and cross-check part numbers against your OEM references to confirm compatibility before purchasing. When in doubt, compare the fork internal dimensions or consult a dealer with your VIN.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with select Honda CRF110F, CRF125F, GROM, Monkey, XR150L, DAX, ADV 160, TR200R models\u003c\/li\u003e\n  \u003cli\u003eCompatible with Yamaha TTR110E models from 2008–2026\u003c\/li\u003e\n  \u003cli\u003eContains OEM replacement numbers for cross-reference\u003c\/li\u003e\n  \u003cli\u003eRefer to the fitment guide image and service manual for verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance improvements can I expect after installing this kit?\u003c\/h3\u003e\n\u003cp\u003eReplacing worn fork seals and internal wear items restores smoother travel and consistent damping behavior, while dust covers reduce contamination that accelerates wear. You should notice reduced oil seepage, more predictable front-end feedback, and improved ride quality when parts were previously degraded. Results depend on correct oil level and condition, and on the overall condition of the fork tubes and internals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEliminates most common oil leaks from aged seals\u003c\/li\u003e\n  \u003cli\u003eHelps return predictable fork rebound and compression\u003c\/li\u003e\n  \u003cli\u003eReduces contamination-related wear with new dust boots\u003c\/li\u003e\n  \u003cli\u003eImproved longevity when installed with proper oil and service practices\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThis kit is ideal for riders performing routine preventive maintenance, repairing visible oil leaks, or completing a front‑end rebuild on compatible small-displacement motorcycles. It suits DIY mechanics who have basic mechanical skills and the required tools, as well as professional shops seeking a convenient, matched set of replacement components. Always confirm model and year compatibility and follow your motorcycle service manual for fluid types and torque specifications to ensure safe, reliable results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this kit on a Honda CRF125F from 2016?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit lists compatibility for CRF125F models within the 2014–2026 range; verify fitment image and compare your fork internals to be certain.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include fork oil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Fork oil is not included—use the type and quantity specified in your motorcycle’s service manual during reassembly.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TUSK","offers":[{"title":"Default Title","offer_id":48086045425822,"sku":"B07YVPZSM1","price":45.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/tusk-fork-kit-front-packaging.jpg?v=1785882827","url":"https:\/\/northtrailauto.ca\/products\/tusk-fork-dust-seal-rebuild-kit-for-crf110f-125f-xr150l-ttr110e-complete-fork-seals-foam-rings-dust-boots","provider":"North Trail Auto","version":"1.0","type":"link"}