{"product_id":"tusk-severe-duty-3mm-motorcycle-inner-tube-80-100x21-reinforced-butyl-tr-4-valve","title":"TUSK Severe Duty 3mm Motorcycle Inner Tube 80\/100x21 – Reinforced Butyl, TR‑4 Valve","description":"\u003cp\u003e\u003cstrong\u003eThe TUSK Severe Duty 3 mm 80\/100×21 inner tube is a heavy‑duty replacement tube built from reinforced butyl rubber with a centered TR‑4 valve for reliable air retention and tougher puncture resistance on off‑road and trail front tires.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for riders who push their bikes into rough terrain, this inner tube increases wall thickness to 3 mm for extra protection against pinch flats, abrasions and impacts that commonly damage standard tubes. Made from quality butyl, it balances flexibility with long‑term air retention and resists aging from heat and pressure. The TR‑4 valve is factory‑centered to fit most rims and simplify inflation and pressure checks. Before mounting, confirm tire and rim compatibility and inspect rim edges for any sharp spots.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 3 mm reinforced wall improve durability?\u003c\/h3\u003e\n\u003cp\u003eThe thicker 3 mm wall reduces the chance of punctures from rocks, roots and pinch flats by providing a stronger barrier between the rim and trail hazards. It also offers improved abrasion resistance during sidewall scrubbing and impacts compared to standard‑thickness tubes. That added material can make the tube slightly heavier, but it significantly increases service life in demanding conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtra 3 mm rubber thickness for impact protection\u003c\/li\u003e\n  \u003cli\u003eBetter abrasion resistance on rough surfaces\u003c\/li\u003e\n  \u003cli\u003eLower puncture frequency on off‑road routes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this tube fit my wheel and valve requirements?\u003c\/h3\u003e\n\u003cp\u003eThis TUSK tube is sized 80\/100×21 — a common front tire dimension on dual‑sport and trail motorcycles — and includes a centered TR‑4 valve stem that matches many rims. Always verify your tire size marking and rim hole diameter before purchase. If your rim requires a different valve type or offset valve location, choose accordingly to ensure proper fit and ease of inflation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExact sizing: 80\/100×21 for front applications\u003c\/li\u003e\n  \u003cli\u003eCentered TR‑4 valve stem compatible with standard rim holes\u003c\/li\u003e\n  \u003cli\u003eConfirm rim and tire markings before installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the butyl construction affect performance?\u003c\/h3\u003e\n\u003cp\u003eButyl rubber is chosen for its stable air retention and flexibility; the material slows down natural leakage, so pressure holds longer between checks. It remains pliable under load for predictable handling and tolerates environmental stresses better than cheaper elastomers. While not as lightweight as latex, butyl delivers dependable performance and easier maintenance for riders focused on durability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuperior air retention versus many alternatives\u003c\/li\u003e\n  \u003cli\u003eFlexible under load for consistent handling\u003c\/li\u003e\n  \u003cli\u003eResistant to aging from heat and pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know before installing this tube?\u003c\/h3\u003e\n\u003cp\u003ePreparation ensures a long tube life: inspect the rim for sharp edges or spoke‑end burrs and remove debris from the tire interior. Slightly inflate the tube for initial positioning, then mount the tire carefully to avoid pinching. Recheck valve fit and set recommended pressure for your tire and load after installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect rim and tire for damage before mounting\u003c\/li\u003e\n  \u003cli\u003ePartially inflate tube to avoid pinches during seating\u003c\/li\u003e\n  \u003cli\u003eSet proper tire pressure and confirm valve alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The TUSK Severe Duty 3 mm 80\/100×21 inner tube suits riders who need a more rugged spare or replacement for front tires on dual‑sport, trail and enduro bikes. Choose this tube if you often encounter rocky, rooty, or uneven terrain and want extra protection against flats without complicated installation. If you require a lighter track‑or‑race‑oriented option or a different valve type, check TUSK’s other sizes and valve configurations to match your rim and riding priorities.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 3 mm tube compatible with my 21\" front rim?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your tire is marked 80\/100×21 and the rim accepts a TR‑4 centered valve. Always confirm tire and rim markings before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this tube for aggressive off‑road riding?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The reinforced 3 mm wall and butyl construction provide enhanced puncture and abrasion resistance for rough terrain.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TUSK","offers":[{"title":"Default Title","offer_id":48087340613790,"sku":"B09YK9RVPF","price":39.32,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/tusk-3mm-80-100x21-front-view.jpg?v=1785920743","url":"https:\/\/northtrailauto.ca\/products\/tusk-severe-duty-3mm-motorcycle-inner-tube-80-100x21-reinforced-butyl-tr-4-valve","provider":"North Trail Auto","version":"1.0","type":"link"}