{"product_id":"u-pol-dolphin-glaze-self-leveling-polyester-finishing-filler-440ml-bonds-to-metal-fast-solvent-resistance","title":"U-POL Dolphin Glaze self-leveling polyester finishing filler 440ml — bonds to metal, fast solvent resistance","description":"\u003cstrong\u003eU-POL Dolphin Glaze is a self-leveling polyester finishing filler in a 440ml spray that produces an exceptionally smooth, tack-free surface and bonds directly to metal.\u003c\/strong\u003e\n\nThis polyester-based finishing glaze is formulated to level out minor surface irregularities and create a smooth foundation for subsequent coatings. Designed for use on automotive and metal repair projects, it combines strong adhesion with quick solvent resistance and straightforward sanding. The aerosol 440ml format makes it convenient for spot repairs, panel finishing and small-scale workshops where ease of application and fast turnaround matter.\n\n\u003ch3\u003eHow quickly does Dolphin Glaze become solvent-resistant and ready for handling?\u003c\/h3\u003e\n\u003cp\u003eAfter application, the glaze develops resistance to solvents within roughly 15–20 minutes, allowing for faster progression to the next repair stages. Full cure and optimal sanding properties depend on film thickness and ambient conditions, so allow additional time when layers are heavier or temperatures are low.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolvent resistance: approximately 15–20 minutes under normal conditions\u003c\/li\u003e\n  \u003cli\u003eThicker coats increase cure times—apply thin, even layers\u003c\/li\u003e\n  \u003cli\u003eWarm, dry environments speed drying; cold or humid conditions slow it\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surface preparation and application technique work best?\u003c\/h3\u003e\n\u003cp\u003eFor the best bond, clean the substrate of grease, rust and loose paint before spraying — the product is suitable for direct-to-metal use when correct preparation is observed. Shake the can thoroughly, apply light, cross-coats and allow each pass to level; aim for an even film to take advantage of the self-leveling properties.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDegrease and abrade surfaces to remove contaminants\u003c\/li\u003e\n  \u003cli\u003eShake can well and spray several thin coats rather than one heavy coat\u003c\/li\u003e\n  \u003cli\u003eMaintain recommended spray distance for uniform coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to sand and finish after application?\u003c\/h3\u003e\n\u003cp\u003eThe glaze sands down smoothly, making feathering and surface shaping straightforward compared with tougher fillers. Use progressively finer abrasives to refine the finish before primer or topcoat, and avoid aggressive sanding immediately after a fresh, tacky application.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSands easily to a smooth profile for primer or paint\u003c\/li\u003e\n  \u003cli\u003eStart with medium grit and finish with fine grit to remove scratches\u003c\/li\u003e\n  \u003cli\u003eAllow proper cure before dry sanding to prevent gumming\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and storage practices should I follow?\u003c\/h3\u003e\n\u003cp\u003eUse in a well-ventilated area and follow standard aerosol safety: wear respiratory protection, gloves and eye protection when spraying. Store the can in a cool, dry place away from heat sources and discard according to local hazardous-waste guidelines when empty or expired.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWear appropriate PPE: respirator, gloves and goggles\u003c\/li\u003e\n  \u003cli\u003eStore upright in a cool, ventilated area away from direct heat\u003c\/li\u003e\n  \u003cli\u003eDispose of empty cans following local regulations\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for\n\nThis 440ml U-POL Dolphin Glaze is aimed at bodyshops, DIY car restorers and metalworkers who need a fast, easy-to-apply finishing product that bonds well to metal and sands smoothly. It's especially useful for spot repairs, panel finishing and situations where quick solvent resistance and a level surface are required before primer and topcoat application.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can Dolphin Glaze be sprayed directly onto bare metal?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—when the metal is clean and abraded; proper surface prep is required for good adhesion.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long should I wait before sanding the glaze?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Allow solvent resistance in 15–20 minutes, but wait longer for full cure depending on coat thickness before sanding.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"U-POL","offers":[{"title":"Default Title","offer_id":48086233284766,"sku":"B0038D8KXU","price":44.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/u-pol-dolphin-glaze-front-can.jpg?v=1785890948","url":"https:\/\/northtrailauto.ca\/products\/u-pol-dolphin-glaze-self-leveling-polyester-finishing-filler-440ml-bonds-to-metal-fast-solvent-resistance","provider":"North Trail Auto","version":"1.0","type":"link"}