{"product_id":"u-pol-raptor-acid-etch-primer-1k-aerosol-13-2-oz-etch-and-prime-for-steel-galvanized-aluminum-corrosion-resistance","title":"U-POL Raptor Acid Etch Primer 1K Aerosol 13.2 oz — etch-and-prime for steel, galvanized \u0026 aluminum, corrosion resistance","description":"\u003cp\u003e\u003cstrong\u003eU-POL Raptor Acid Etch Primer 1K Aerosol is a ready-to-spray, phosphoric-acid-based metal primer that etches and primes bare steel, galvanized metal, and aluminum in one step for improved adhesion and corrosion resistance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen you're preparing exposed metal for paint—whether repairing panels, treating rub-throughs, or priming a new part—surface chemistry matters. This 13.2 oz aerosol from U-POL combines a chemical etch with a primer film to create a sound, paintable substrate without the need for heavy sanding. It’s designed for automotive and light industrial uses where fast, reliable metal adhesion and anti-corrosive protection are required.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this primer improve paint adhesion on metal?\u003c\/h3\u003e\n\u003cp\u003eThe formula contains a phosphoric acid ester that micro-etches the metal surface, removing oxides and creating a keyed profile for subsequent coatings. That chemical etch promotes mechanical and chemical bonding, so topcoats adhere better and are less likely to peel from marginal substrates. It’s especially useful on galvanized steel and aluminum where conventional primers struggle to stick.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePhosphoric acid ester creates a micro-etched surface for stronger bond\u003c\/li\u003e\n  \u003cli\u003eDesigned for bare steel, galvanized metal, and aluminum\u003c\/li\u003e\n  \u003cli\u003eImproves performance of both solvent- and waterborne topcoats\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use it to stop rust and protect metal parts?\u003c\/h3\u003e\n\u003cp\u003eThis aerosol lays down a corrosion-resistant barrier that helps prevent further oxidation on cleaned metal. It’s formulated to reduce the progression of rust on steel and to stabilize surfaces before topcoating. For active, heavy rust you should remove scale first; this product excels on bare metal and light surface corrosion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAnti-corrosive properties inhibit surface rust after application\u003c\/li\u003e\n  \u003cli\u003eBest applied to bare or lightly cleaned metal for maximum effect\u003c\/li\u003e\n  \u003cli\u003eCompatible with common automotive topcoats once dry\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is the application process and coverage like?\u003c\/h3\u003e\n\u003cp\u003eThe aerosol uses a flat-fan, high-atomization nozzle to produce an even spray pattern and good coverage with minimal runs. No sanding is required after application in typical workflows, and it can be topcoated directly when dried according to instructions. The 13.2 oz can is sized for spot repairs, panel work, and touch-ups rather than full-vehicle priming.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-atomization flat fan nozzle for wide, even spray\u003c\/li\u003e\n  \u003cli\u003eNo sanding needed on properly prepared bare metal\u003c\/li\u003e\n  \u003cli\u003eDirectly topcoatable with most paint systems after drying\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this product suitable for professionals and DIYers?\u003c\/h3\u003e\n\u003cp\u003eYes—the one-step etch-and-prime format simplifies metal preparation for both shop technicians and competent DIY users. The aerosol format removes the need for mixing or specialized spray equipment for small jobs, while the chemistry meets professional expectations for adhesion and corrosion control. Follow safety guidance for acid-based aerosols and ensure adequate ventilation during use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConvenient aerosol for spot repairs and on-site work\u003c\/li\u003e\n  \u003cli\u003eProfessional-grade adhesion and anti-corrosion performance\u003c\/li\u003e\n  \u003cli\u003eRequires standard safety measures: ventilation, PPE, and surface prep\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: U-POL Raptor Acid Etch Primer 1K Aerosol is aimed at automotive refinishers, collision-repair shops, restoration hobbyists, and maintenance technicians who need a compact, effective metal primer. It’s ideal for prepping bare steel, galvanized parts, and aluminum components prior to color or protective topcoats when a fast, reliable etch-and-prime solution is preferred.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I apply color directly over this primer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—once the primer is fully dry you can topcoat with most paint systems; follow drying times on the can.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to sand after using this etch primer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Sanding isn’t required on properly prepped bare metal, but remove heavy scale or loose rust first.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"U-POL","offers":[{"title":"Default Title","offer_id":48086286041246,"sku":"B07DGGJTFP","price":44.44,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/u-pol-raptor-acid-etch-primer-aerosol-front-packaging.jpg?v=1785893759","url":"https:\/\/northtrailauto.ca\/products\/u-pol-raptor-acid-etch-primer-1k-aerosol-13-2-oz-etch-and-prime-for-steel-galvanized-aluminum-corrosion-resistance","provider":"North Trail Auto","version":"1.0","type":"link"}