{"product_id":"ulreon-marine-oil-extractor-pump-10-25-long-1-25-diameter-brass-hand-pump-for-3-4-dipstick-tubes-compact-corrosion-resist","title":"Ulreon Marine Oil Extractor Pump 10.25\" Long, 1.25\" Diameter — Brass Hand Pump for 3\/4\" Dipstick Tubes, Compact \u0026 Corrosion-Resist","description":"\u003cp\u003e\u003cstrong\u003eThe Ulreon 34060-0130 is a hand-operated marine oil extractor pump built from brass that rapidly removes engine oil from OMC, Mercruiser and similar outboard\/diesel engines via a dipstick tube connection.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you change oil on boats, the Ulreon 34060-0130 gives a compact, durable option to draw oil out through the engine dipstick tube without crawls under the engine or messy spills. It connects to a 3\/4\" male garden-hose threaded dipstick tube common on many marine engines and delivers up to about 1 gallon (4 liters) per minute, making routine oil maintenance quicker and cleaner.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this pump fit my OMC or Mercruiser engine?\u003c\/h3\u003e\n\u003cp\u003eThe pump is designed around a 3\/4\" threaded swivel fitting that screws onto standard dipstick tubes found on OMC, Mercruiser and compatible marine engines. A 1\/2\" discharge hose attaches to the pump’s barb for directing oil into a catch container.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 3\/4\" male garden-hose threaded dipstick tubes.\u003c\/li\u003e\n  \u003cli\u003eSwivel hose fitting eases alignment and reduces kink risk.\u003c\/li\u003e\n  \u003cli\u003e1\/2\" outlet hose for easy transfer to waste containers.\u003c\/li\u003e\n  \u003cli\u003eCompact 10.25\" body for access in tight engine bays.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow fast and efficient is oil removal with this extractor?\u003c\/h3\u003e\n\u003cp\u003eThe Ulreon pump is hand-operated and optimized for fast strokes: it displaces approximately 1 gallon (4 liters) per minute with roughly 40 strokes per gallon. That rate lets a single user drain most small to medium marine engines quickly without tools or ramps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDelivers about 1 gallon (4 L) per minute under normal conditions.\u003c\/li\u003e\n  \u003cli\u003eApproximately 40 strokes required to extract one gallon of oil.\u003c\/li\u003e\n  \u003cli\u003eOne-handed pumping design speeds the process for solo operators.\u003c\/li\u003e\n  \u003cli\u003eIdeal for routine drain-and-fill maintenance at the dock or slip.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and seals protect the pump from marine corrosion and leaks?\u003c\/h3\u003e\n\u003cp\u003eThe extractor’s main components are machined from brass to resist saltwater corrosion and provide long-term durability in marine environments. Seals are inserted at both the cylinder and the swivel fitting to limit leaks and keep the pumping action consistent over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrass construction resists salt and fresh water corrosion.\u003c\/li\u003e\n  \u003cli\u003eInserted seals at cylinder and fitting help prevent drips.\u003c\/li\u003e\n  \u003cli\u003eSwivel fitting reduces stress on the dipstick tube connection.\u003c\/li\u003e\n  \u003cli\u003eDesigned for repeated use without rapid wear of metal parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical tips should I follow when using the pump?\u003c\/h3\u003e\n\u003cp\u003eSafe, effective operation depends on a few simple precautions: do not extract oil hotter than 140°F, avoid pushing the dipstick tube too deep, and wipe the swivel fitting after use to prevent dripping. The pump ships with an instruction leaflet covering setup and one-handed pumping technique.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not exceed oil temperatures of 140°F for safe operation.\u003c\/li\u003e\n  \u003cli\u003eAvoid inserting the dipstick tube excessively deep into the engine.\u003c\/li\u003e\n  \u003cli\u003eWipe swivel fitting and catch drips after removing the pump.\u003c\/li\u003e\n  \u003cli\u003eStart the engine briefly after draining before adding fresh oil if recommended by the engine manufacturer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Ulreon 34060-0130 is designed for boat owners, marina technicians, and DIY marine mechanics who need a dependable, portable extractor for routine oil changes on OMC, Mercruiser and compatible engines. It suits users who want a compact, corrosion-resistant tool that speeds oil removal without lifts or access panels, especially for weekend boaters, small commercial operators, and maintenance crews at docks and marinas.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this pump fit my Mercruiser dipstick tube?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—it fits dipstick tubes with a 3\/4\" male garden-hose thread typical on many Mercruiser and OMC engines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I pump very hot oil with this extractor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—do not use the pump with oil hotter than 140°F to avoid damage and safety risks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Ulreon","offers":[{"title":"Default Title","offer_id":48086773039262,"sku":"B0F8BHZ8HY","price":54.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/ulreon-front-view-pump.jpg?v=1785904474","url":"https:\/\/northtrailauto.ca\/products\/ulreon-marine-oil-extractor-pump-10-25-long-1-25-diameter-brass-hand-pump-for-3-4-dipstick-tubes-compact-corrosion-resist","provider":"North Trail Auto","version":"1.0","type":"link"}