{"product_id":"valterra-rv-hi-flow-water-regulator","title":"Valterra RV Hi-Flow Water Regulator","description":"\u003cp\u003e\u003cstrong\u003eThe Valterra Lead-Free Hi-Flow Brass Water Regulator reduces campground supply pressure to a safe 50–55 psi, protecting RV plumbing and hoses while filtering debris.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen you connect to campground water you want steady, safe pressure and clean flow—especially when plumbing, fittings, and fixtures are on board a camper or trailer. This compact brass regulator screws onto the spigot, limits inlet pressure to the ideal 50–55 psi range, and uses a removable screened washer to catch grit before it enters your hose. Built from lead-free brass to meet drinking-water standards, the valve gives reliable performance with minimal maintenance.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this regulator protect my RV plumbing?\u003c\/h3\u003e\n\n\u003cp\u003eThe regulator prevents high inlet pressures from subjecting hoses, fittings, and onboard pipes to sudden surges that can cause leaks or bursts. It acts as a mechanical safeguard mounted at the water source, so pressure into the hose never exceeds the set range when inlet pressure is higher. The screened washer also traps particulate that could damage valves and fixtures.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLimits output pressure to 50–55 psi to reduce stress on RV plumbing.\u003c\/li\u003e\n  \u003cli\u003ePrevents high-pressure spikes from reaching hoses and joints.\u003c\/li\u003e\n  \u003cli\u003eRemovable screened washer filters debris for cleaner water flow.\u003c\/li\u003e\n  \u003cli\u003eLead-free brass resists corrosion and complies with drinking-water rules.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this regulator work with my camper or trailer?\u003c\/h3\u003e\n\n\u003cp\u003eThis Valterra regulator is designed for standard campground spigots and is broadly compatible with most RVs, travel trailers, and campers that accept a typical garden-spigot attachment. It does not reduce pressure if the campground supply is already below roughly 50 psi, so it won’t create a vacuum or drop performance in low-pressure situations. Note that very old RV systems with fragile fittings should be inspected before use.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits standard campground spigots and common RV hose connections.\u003c\/li\u003e\n  \u003cli\u003eFunctions automatically only when inlet pressure exceeds 50 psi.\u003c\/li\u003e\n  \u003cli\u003eNot intended to actively boost low-pressure supplies.\u003c\/li\u003e\n  \u003cli\u003eRecommended inspection for older or delicate plumbing systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain the Valterra Hi-Flow regulator?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is simple: thread the regulator onto the campground spigot, then attach your freshwater hose to the regulator outlet. For upkeep, unscrew the unit occasionally to access and clean the screened washer—this prevents collected sediment from restricting flow. The lead-free brass body needs no special care beyond routine checks for leaks and debris build-up.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eScrew onto campground spigot, attach hose to outlet—no tools required in most cases.\u003c\/li\u003e\n  \u003cli\u003eRemove and rinse the screened washer when debris accumulates.\u003c\/li\u003e\n  \u003cli\u003eVisual inspections for leaks and thread wear help maintain performance.\u003c\/li\u003e\n  \u003cli\u003eDurable brass construction minimizes corrosion and extends service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat pressure range should I expect and why does it matter?\u003c\/h3\u003e\n\n\u003cp\u003eThe regulator holds outlet pressure at approximately 50–55 psi when inlet pressure is higher, which is a balance between adequate water flow and safety for fixtures. Many RV water systems, hoses, and appliance connections are engineered for pressures in that range; keeping pressure at this level reduces the chance of stress-related failures. Avoid operating with inlet pressures substantially above the regulator’s range without additional protection.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMaintains outlet pressure near 50–55 psi when input exceeds that range.\u003c\/li\u003e\n  \u003cli\u003ePreserves proper flow for showers, faucets, and onboard appliances.\u003c\/li\u003e\n  \u003cli\u003eReduces risk of pipe or hose failures due to excessive pressure.\u003c\/li\u003e\n  \u003cli\u003eNot a solution for regulating systems that already have very low pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Valterra Lead-Free Hi-Flow Brass Water Regulator is ideal for RV owners, weekend campers, and trailer renters who frequently connect to campground water supplies and want a straightforward, durable way to protect onboard plumbing. It suits people who prioritize code-compliant, lead-free materials and an easy-to-service design with a debris screen. If you need consistent pressure control, reduced maintenance from sediment, and a long-lasting brass adapter that meets drinking-water standards, this regulator is a practical addition to your travel kit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Valterra regulator lower water pressure if supply is under 50 psi?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It only reduces pressure when inlet exceeds about 50 psi; it won’t boost low-pressure supplies.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I clean the screened washer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Unscrew the regulator, remove the washer, rinse under clean water, then replace—no tools usually required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Valterra","offers":[{"title":"Default Title","offer_id":48086861512862,"sku":"B003YJJHI0","price":34.09,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/valterra-front-view-regulator.jpg?v=1785908353","url":"https:\/\/northtrailauto.ca\/products\/valterra-rv-hi-flow-water-regulator","provider":"North Trail Auto","version":"1.0","type":"link"}