{"product_id":"vevor-brake-kit-for-ford-f-150-2012-2020-mpb-13-8-13-7-drilled-slotted-rotors-with-low-dust-ceramic-pads","title":"VEVOR Brake Kit for Ford F-150 2012–2020 (MPB) — 13.8\"\/13.7\" Drilled \u0026 Slotted Rotors with Low-Dust Ceramic Pads","description":"\u003cp\u003e\u003cstrong\u003eVEVOR’s complete front-and-rear brake kit replaces worn components on 2012–2020 Ford F-150 (MPB only), pairing drilled-and-slotted rotors with low-dust ceramic pads for improved heat management and quieter stopping.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit includes matched front and rear rotors and ceramic brake pads engineered to meet the dimensional and performance requirements of the Ford F-150 (MPB specification) produced between 2012 and 2020. The rotors are drilled and slotted to shed heat and gases during high-load stops, while the ceramic pads are formulated to reduce dust and noise. All metal parts receive a protective galvanization to resist corrosion and extend service life, and the set is balanced to help retain factory-like braking feel and pedal response.\u003c\/p\u003e\n\n\u003ch3\u003eHow will drilled and slotted rotors affect braking performance?\u003c\/h3\u003e\n\u003cp\u003eDrilled holes and machining slots help dissipate heat and evacuate surface gasses that can form during hard braking. That improves fade resistance on repeated stops and keeps friction surfaces cleaner for more consistent bite.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrilled holes quickly release trapped heat and gases.\u003c\/li\u003e\n  \u003cli\u003eSlots remove pad glazing and debris for steady contact.\u003c\/li\u003e\n  \u003cli\u003eMachined surfaces promote faster cooldown between repeated stops.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo the ceramic pads reduce dust and cabin noise?\u003c\/h3\u003e\n\u003cp\u003eCeramic formulations typically generate finer, lighter dust that adheres less to wheels and scream less under load. These pads are specifically designed for low dust and reduced noise while maintaining reliable wear characteristics and fade resistance for road use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow-dust compound minimizes wheel discoloration and cleaning frequency.\u003c\/li\u003e\n  \u003cli\u003eEngineered shims and chamfers reduce squeal and vibration.\u003c\/li\u003e\n  \u003cli\u003eDurable material balances longevity with consistent stopping power.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these parts fit my F-150 and match factory safety specs?\u003c\/h3\u003e\n\u003cp\u003eThis kit is built to fit Ford F-150 models from 2012 through 2020 that use the MPB rotor\/pad configuration. VEVOR controls manufacturing tolerances and galvanizes rotor surfaces to meet corrosion and dimensional expectations similar to OEM standards, but always verify the MPB identification before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFront rotor diameter: 13.8 inches; rear rotor diameter: 13.7 inches.\u003c\/li\u003e\n  \u003cli\u003eDesigned for MPB-specified 2012–2020 Ford F-150 applications only.\u003c\/li\u003e\n  \u003cli\u003eIncludes matched pad and rotor pairs to maintain balanced braking feel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain this brake kit for best results?\u003c\/h3\u003e\n\u003cp\u003eFollow vehicle service manual torque specs and bedding procedures after installation. Proper installation, torquing of caliper hardware, and a controlled bedding routine help the pads and rotors form an even contact layer for consistent performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse OEM or quality aftermarket tools and correct torque values.\u003c\/li\u003e\n  \u003cli\u003ePerform a gradual bedding-in sequence per pad manufacturer guidance.\u003c\/li\u003e\n  \u003cli\u003eInspect hardware, hoses, and fluid levels during installation and routine service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this kit is for: drivers and DIY mechanics who own a 2012–2020 Ford F-150 with the MPB brake configuration and want a full front-and-rear replacement that balances everyday comfort with improved heat handling. It’s suited to trucks used for commuting, towing, or light-duty hauling where lower dust, quieter operation, and better fade resistance matter. If you need an OEM-form-fit replacement with enhanced rotor cooling and corrosion protection, this VEVOR kit is designed to be a direct, durable upgrade.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this kit compatible with my 2015 Ford F-150?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, if your 2015 F-150 uses the MPB rotor\/pad specification. Verify MPB fitment before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the rotors come pre-galvanized to resist rust?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the rotors receive a galvanization finish to help resist corrosion and extend service life.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VEVOR","offers":[{"title":"Default Title","offer_id":48080735600798,"sku":"B0DLFJLGGM","price":448.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/vevor-front-rotors-view.jpg?v=1785784711","url":"https:\/\/northtrailauto.ca\/products\/vevor-brake-kit-for-ford-f-150-2012-2020-mpb-13-8-13-7-drilled-slotted-rotors-with-low-dust-ceramic-pads","provider":"North Trail Auto","version":"1.0","type":"link"}