{"product_id":"vht-engine-metallic-high-heat-spray-paint-burnt-copper-11-oz-metallic-finish-chemical-resistant","title":"VHT Engine Metallic High-Heat Spray Paint — Burnt Copper 11 oz, Metallic Finish \u0026 Chemical-Resistant","description":"\u003cp\u003e\u003cstrong\u003eVHT SP402 Engine Metallic is a high-heat spray paint in Burnt Copper formulated to withstand engine temperatures, chemicals and everyday garage exposure while delivering a metallic sparkle.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis aerosol coating combines urethane and ceramic resins to produce a durable metallic finish intended for engine bays and other high-temperature components. The 11 oz can covers trims, accessories and full components with a decorative, reflective copper tint that resists oil, gasoline residues and many degreasers when applied and cured correctly.\u003c\/p\u003e\n\n\u003ch3\u003eHow hot can this paint tolerate on engine parts?\u003c\/h3\u003e\n\n\u003cp\u003eThe VHT Engine Metallic formula is engineered for intermittent exposure up to 650°F (343°C). It is designed for typical engine heat cycles rather than constant industrial furnace temperatures. Proper curing is key to achieving the advertised heat resistance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRated intermittent resistance: up to 650°F (343°C).\u003c\/li\u003e\n  \u003cli\u003eCures fully in service with normal engine operating temperatures or by heating to 200°F for accelerated cure.\u003c\/li\u003e\n  \u003cli\u003eNot intended for continuous immersion in extreme industrial heat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich engine parts are suitable for this Burnt Copper spray?\u003c\/h3\u003e\n\n\u003cp\u003eThis spray paint is intended for a wide range of under-hood and drivetrain components where heat and chemical resistance matter. Use it to refresh or customize visible engine elements and hard-to-reach accessories for both restoration and visual upgrades.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCommon uses: valve covers, headers, engine blocks, starters and brackets.\u003c\/li\u003e\n  \u003cli\u003eAlso appropriate for transmissions, differential covers and water pumps.\u003c\/li\u003e\n  \u003cli\u003eWorks as part of a coordinated system with engine primers and clears from VHT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I apply and cure the VHT Engine Metallic for best results?\u003c\/h3\u003e\n\n\u003cp\u003eSurface prep, thin even coats and correct curing are the most important steps to a durable finish. The paint is touch-dry quickly, but requires heat exposure to reach its full mechanical and chemical resistance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eClean and degrease surfaces thoroughly, removing rust and loose paint first.\u003c\/li\u003e\n  \u003cli\u003eApply multiple light coats rather than one heavy coat; allow flash time between passes.\u003c\/li\u003e\n  \u003cli\u003eTouch-dry in about 30 minutes; allow overnight dry before handling; final cure with engine heat or bake at 200°F if possible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this coating resist gasoline, oils and shop chemicals?\u003c\/h3\u003e\n\n\u003cp\u003eThe urethane-ceramic blend is formulated to resist many common automotive fluids and cleaning agents better than standard paints. While it offers strong protection, avoid exposure to harsh solvents or concentrated chemical baths without testing first.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eGood resistance to gasoline blends, motor oil and light degreasing agents.\u003c\/li\u003e\n  \u003cli\u003eResists salt spray and road contaminants when properly applied and cured.\u003c\/li\u003e\n  \u003cli\u003eAvoid prolonged contact with aggressive solvents or stripping chemicals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: VHT SP402 Burnt Copper Engine Metallic is aimed at car builders, restorers and performance enthusiasts who want a heat-tolerant, decorative metallic finish on engine components. It's also useful for mechanics and hobbyists needing a resilient coating for parts exposed to heat, oil and road conditions. Use it as part of VHT’s engine coating system—primer, color and clear—for best durability and appearance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long until the paint is touch-dry?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Touch-dry in about 30 minutes; allow overnight for handling and heat-cure for full properties.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I bake parts to cure this paint instead of running the engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — parts can be heated to about 200°F to accelerate and complete the cure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":48086087336094,"sku":"B002NUFVRW","price":34.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/vht-burnt-copper-front-can.jpg?v=1785884010","url":"https:\/\/northtrailauto.ca\/products\/vht-engine-metallic-high-heat-spray-paint-burnt-copper-11-oz-metallic-finish-chemical-resistant","provider":"North Trail Auto","version":"1.0","type":"link"}