{"product_id":"viqua-s200rl-ho-uv-replacement-lamp-high-output-oem-for-vh200-sc-200-sp200-ho-spv-3-5","title":"Viqua S200RL-HO UV Replacement Lamp — High-Output OEM for VH200, SC-200, SP200-HO \u0026 SPV-3.5","description":"\u003cp\u003e\u003cstrong\u003eThe Viqua S200RL-HO is a genuine high‑output replacement UV lamp engineered to restore designed UV intensity in compatible Viqua residential and point-of-entry systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen your Viqua UV system needs a new bulb, choosing an authentic S200RL-HO replacement ensures the chamber delivers the UV output it was built to provide. This high‑output OEM lamp fits a number of Viqua models including VH200, SC-200, SCM-200, SP200‑HO, SPV‑3.5 and the discontinued SPV‑200, and is intended for yearly replacement to maintain consistent performance and warranty compliance.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the S200RL-HO fit my existing Viqua unit?\u003c\/h3\u003e\n\u003cp\u003eThe S200RL-HO is manufactured to the exact specifications required by Viqua systems listed as compatible. It installs in the lamp chamber the same way the original bulb did, providing correct electrical and physical alignment for proper operation. Using this OEM lamp avoids fitment problems that can occur with non‑branded alternatives.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect OEM form factor for VH200, SC‑200, SCM‑200, SP200‑HO, SPV‑3.5, SPV‑200\u003c\/li\u003e\n  \u003cli\u003eStandard connections and dimensions match factory lamp holders\u003c\/li\u003e\n  \u003cli\u003eDesigned to work with original ballast and chamber seals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen should I replace the UV lamp and why?\u003c\/h3\u003e\n\u003cp\u003eViqua recommends replacing the lamp every 12 months because UV‑C output gradually declines during operation. Replacing on schedule ensures the system continues to perform as designed and prevents diminished treatment from an aged bulb. Annual replacement also helps keep any applicable warranties intact.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplace every 12 months for consistent UV intensity\u003c\/li\u003e\n  \u003cli\u003ePrevents reduced effectiveness due to lamp aging\u003c\/li\u003e\n  \u003cli\u003eMaintains manufacturer warranty and system specifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance benefits does the high‑output bulb provide?\u003c\/h3\u003e\n\u003cp\u003eThe 'HO' designation means this lamp delivers a higher UV output compared with standard bulbs used in some systems, aligning with the system’s rated capacity. That greater output supports the system’s designed contact and dose requirements as water flows through the chamber. Choosing the correct high‑output lamp helps preserve the system’s overall treatment performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigher UV‑C emission to meet original system design\u003c\/li\u003e\n  \u003cli\u003eStable output across expected operating life when replaced annually\u003c\/li\u003e\n  \u003cli\u003eEngineered to work with Viqua ballasts and quartz sleeve arrangements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there installation or safety considerations I should know?\u003c\/h3\u003e\n\u003cp\u003eInstalling the S200RL‑HO follows the same steps as other Viqua lamp replacements: power down the unit, remove the chamber cap, extract the old lamp, and carefully insert the new OEM lamp. Avoid touching the lamp glass with bare hands and verify seals and O‑rings are intact to prevent leaks. If you’re unsure, consult the system manual or a qualified service technician.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePower off system before replacing the lamp\u003c\/li\u003e\n  \u003cli\u003eHandle lamp by ends or with gloves to avoid oils on glass\u003c\/li\u003e\n  \u003cli\u003eCheck quartz sleeve and O‑rings; replace if damaged\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this replacement lamp for? The Viqua S200RL‑HO is intended for homeowners and service professionals who operate compatible Viqua residential and light‑commercial UV systems and want an OEM high‑output lamp to preserve original system performance. It’s the right choice when you need a direct, manufacturer‑specified replacement to maintain UV intensity, protect system reliability, and keep warranty terms valid. If you operate a VH200, SC‑200, SCM‑200, SP200‑HO, SPV‑3.5, or own an older SPV‑200, this lamp was designed to match your system’s requirements and installation method.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the S200RL-HO compatible with my VH200 system?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The S200RL‑HO is an OEM replacement specifically compatible with VH200 units and other listed Viqua models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace the Viqua S200RL-HO lamp?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replace the lamp every 12 months to maintain designed UV output and system performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Viqua","offers":[{"title":"Default Title","offer_id":48082766692510,"sku":"B002WDMHPO","price":207.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/viqua-s200rl-ho-front-view.jpg?v=1785813704","url":"https:\/\/northtrailauto.ca\/products\/viqua-s200rl-ho-uv-replacement-lamp-high-output-oem-for-vh200-sc-200-sp200-ho-spv-3-5","provider":"North Trail Auto","version":"1.0","type":"link"}