{"product_id":"vvivid-black-carbon-fiber-car-wrap-vinyl-roll-2ft-x-5ft-textured-air-release-for-easy-diy","title":"VViViD Black Carbon Fiber Car Wrap Vinyl Roll 2ft x 5ft — Textured, Air-Release for Easy DIY","description":"\u003cp\u003e\u003cstrong\u003eVViViD XPO Black Carbon Fiber is a textured automotive wrap roll (2ft x 5ft) designed to replicate carbon fiber look with built-in air-release adhesive for smoother DIY application.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for car enthusiasts and fleet professionals, this VViViD XPO film combines a high-detail carbon fiber texture with performance-focused backing technologies so you can achieve a clean, durable finish without professional-only tools. The 2ft x 5ft roll size suits accent work, partial wraps, trim pieces, and repairs while the 3.9 mil film thickness balances conformability with resistance to visible defects during installation and everyday use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this vinyl make wrapping easier for DIYers?\u003c\/h3\u003e\n\u003cp\u003eThe VViViD XPO film includes an air-release adhesive system that helps push out trapped bubbles during installation, reducing the need for frequent re-lifts and minimizing surface imperfections. The repositionable, solvent-based adhesive gives you short-term adjustability before setting into a permanent bond.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt-in Air Release channels for faster bubble elimination\u003c\/li\u003e\n  \u003cli\u003eRepositionable solvent-based adhesive for alignment during install\u003c\/li\u003e\n  \u003cli\u003e3.9 mil thickness for stretch without early stretch marks\u003c\/li\u003e\n  \u003cli\u003eDry-apply only—no wetting solution required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this vinyl conform around curves, edges, and badging?\u003c\/h3\u003e\n\u003cp\u003eThis textured carbon fiber film stretches and conforms well to moderate compound curves and recesses thanks to its 3.9 mil construction and stretchable face film. For sharp edges or long-term fleet use, primers and edge sealers can improve adhesion and longevity while preventing edge lift.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGood conformability for trim, mirrors, and partial wraps\u003c\/li\u003e\n  \u003cli\u003eHeat Fuse technology supports clean heat-forming where needed\u003c\/li\u003e\n  \u003cli\u003eCompatible with 3M 94 primer and 3M edge sealer to enhance bond\u003c\/li\u003e\n  \u003cli\u003eWorks with typical hand tools and a heat gun for detailing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the finish outdoors and what maintenance does it need?\u003c\/h3\u003e\n\u003cp\u003eVViViD XPO Black Carbon Fiber is engineered for long-term exterior use and is expected to withstand 5–7 years under normal outdoor conditions with proper prep and installation. The VViViD Resist surface treatment helps reduce staining and environmental wear while simple care preserves appearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEstimated outdoor life: 5–7 years with correct application\u003c\/li\u003e\n  \u003cli\u003eVViViD Resist finish lowers risk of surface discoloration\u003c\/li\u003e\n  \u003cli\u003eHand wash or pressure-wash at safe distances; avoid harsh solvents\u003c\/li\u003e\n  \u003cli\u003eAvoid aggressive polishing that could alter texture look\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat accessories and steps improve installation and lifespan?\u003c\/h3\u003e\n\u003cp\u003eWhile this film installs as a dry application, primers and edge sealers are recommended for demanding environments. Using 3M 94 primer on low-energy plastics and an edge sealer at cutlines reduces peel and extends service life without harming texture.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3M 94 primer increases adhesion on plastics and difficult substrates\u003c\/li\u003e\n  \u003cli\u003e3M edge sealer protects cut edges and prevents lifting\u003c\/li\u003e\n  \u003cli\u003eUse a heat gun and felt squeegee for smoother curves and textures\u003c\/li\u003e\n  \u003cli\u003eFollow standard surface prep: degrease, remove wax, and dry thoroughly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The VViViD XPO Black Carbon Fiber roll is ideal for DIYers doing accent work, detailers repairing trim, and small fleet owners seeking a lightweight, cost-effective alternative to paint. It suits anyone wanting a realistic carbon fiber appearance with accessible installation features and a durable finish for moderate outdoor exposure.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this film myself without professional tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s designed for dry DIY installation using common tools like a squeegee and heat gun; primer or edge sealer is optional for added durability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long will the wrap last outdoors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: With proper prep and installation, the film typically lasts 5–7 years outdoors under normal conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VViViD","offers":[{"title":"Default Title","offer_id":48087601250462,"sku":"B098R9SHK8","price":37.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/vivid-xpo-front-packaging_71ad52a6-0efa-4b1c-bf54-c252af9e0b10.jpg?v=1785926359","url":"https:\/\/northtrailauto.ca\/products\/vvivid-black-carbon-fiber-car-wrap-vinyl-roll-2ft-x-5ft-textured-air-release-for-easy-diy","provider":"North Trail Auto","version":"1.0","type":"link"}