{"product_id":"yuesstloo-turbo-system-leakage-tester-kit-19pcs-0-6-bar-gauge-adapter-set-for-turbo-hoses-fits-31-110mm","title":"Yuesstloo Turbo System Leakage Tester Kit — 19PCS 0–6 bar Gauge \u0026 Adapter Set for Turbo Hoses (Fits 31–110mm)","description":"\u003cp\u003e\u003cstrong\u003eThe Yuesstloo 19PCS Turbo System Leakage Tester Kit is a complete shop-grade set for locating and diagnosing leaks in turbocharger hoses, intercoolers and cooling-system pipes using compressed air up to 6 bar.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your turbocharged vehicle is losing boost or showing inconsistent pressure, this kit gives you a reliable, portable way to pressurize and inspect the turbo plumbing. It combines a calibrated 0–6 bar (0–87 psi) gauge with a pressure regulator, quick shut-off valve and a collection of 16 stepped adaptors that fit a wide range of hose diameters. Built for workshop air sources, the tools make leak tracing faster and reduce guesswork during troubleshooting.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the kit pinpoint where boost pressure is escaping?\u003c\/h3\u003e\n\u003cp\u003eThe set pressurizes the intake or intercooler plumbing so you can observe pressure stability and listen or feel for leaks. The gauge and regulator let you introduce controlled pressure while the assortment of adaptors and stoppers create tight seals on different hose sizes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse the stepped adaptors to match hose inner diameters from about 31 mm to 110 mm.\u003c\/li\u003e\n  \u003cli\u003eLock or adjust pressure with the regulator and gasket-sealed fittings for steady readings.\u003c\/li\u003e\n  \u003cli\u003eListen, spray soapy water, or inspect connection points and intercooler seams for bubbling or air escape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components are included and what hose sizes will it fit?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains 16 stepped adaptors, a pressure gauge with integrated regulator and shut-off valve, and a smoke adaptor for enhanced leak detection. The stepped adaptor range covers common pipe inner diameters used on passenger and light commercial turbo systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdaptors accommodate pipes roughly 31–38mm, 46–51mm, 55–60mm, 65–70mm and up to 105–110mm.\u003c\/li\u003e\n  \u003cli\u003ePressure gauge measures 0–6 bar (0–87 psi) with a locking dialing feature for steady readings.\u003c\/li\u003e\n  \u003cli\u003eRed manual valve and excess-pressure release provide safe control during pressurization.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the Yuesstloo tester used safely in a workshop?\u003c\/h3\u003e\n\u003cp\u003eDesigned for use with a regulated compressed-air source, the procedure is straightforward: isolate the section to test, fit an appropriately sized adaptor or stopper, then pressurize slowly while monitoring the gauge. The regulator and release valve help prevent over-pressurization when setting up and conducting checks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlways pre-set the regulator to a low pressure before connecting to the vehicle.\u003c\/li\u003e\n  \u003cli\u003eBlock intake and exhaust paths with stoppers to limit the pressurized volume and improve sensitivity.\u003c\/li\u003e\n  \u003cli\u003eIf pressure climbs too high, pull the excess pressure release or open the red valve to reduce pressure safely.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this kit test systems other than turbo hoses?\u003c\/h3\u003e\n\u003cp\u003eYes — although optimized for turbocharger plumbing, the adaptors and gauge work on many radiators, coolers and general pipe assemblies that accept stepped sealing plugs. It’s versatile for shops that service intercoolers, charge pipes and some cooling circuits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for most car and light commercial turbo systems; some heavy-duty and marine hoses may require verification.\u003c\/li\u003e\n  \u003cli\u003eWorks with radiator and cooler hose sections where adapters fit tightly.\u003c\/li\u003e\n  \u003cli\u003eUseful for preliminary diagnostics before more invasive disassembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: technicians, DIY enthusiasts and fleet maintenance teams who need a compact, repeatable method to locate boost and coolant-line leaks. If you run a workshop or perform turbo system repairs, this Yuesstloo kit reduces guessing, speeds diagnosis and helps you confirm repairs without expensive bench equipment. Confirm adapter fit for your specific vehicle hoses before purchase to ensure compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What pressure range does the gauge support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The gauge measures 0–6 bar (0–87 psi) and includes a regulator and pressure-release for safe use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the adaptors fit my car's turbo hoses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The 16 stepped adaptors cover hose inner diameters roughly 31–110 mm; check your hose size to confirm compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yuesstloo","offers":[{"title":"Default Title","offer_id":48081402200222,"sku":"B0F5W1S6YX","price":152.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/yuesstloo-front-kit-arranged.jpg?v=1785803153","url":"https:\/\/northtrailauto.ca\/products\/yuesstloo-turbo-system-leakage-tester-kit-19pcs-0-6-bar-gauge-adapter-set-for-turbo-hoses-fits-31-110mm","provider":"North Trail Auto","version":"1.0","type":"link"}