24 Pack D Rings Tie Down Anchors Hooks Heavy Duty 1/4"

VEEBELL 24-pack D-ring tie down anchors are heavy-duty surface-mounted lashing points rated up to 2,400 lb each for securing cargo on trailers, truck beds, campers and more.

These black zinc-plated D-ring anchors come as a set of 24 with 48 hardened screws and swivel mounting brackets so each ring folds flat when not in use. Sized to accept common straps and bungees, the rings mount to wood or metal with 1/4" (6 mm) fasteners and are finished to resist corrosion. The kit gives you multiple, evenly spaced anchor points for safer cargo restraint and neater storage on trailers, pickups, RVs and utility beds.

How strong are these D-ring tie downs?

Each VEEBELL D-ring is engineered for heavy loads and tested to support up to 2,400 pounds per ring when correctly mounted to a solid surface. Strength comes from the 1/4" thick mounting bolts, solid metal construction and the included reinforced brackets.

• Rated capacity: up to 2,400 lb per D-ring under proper installation
• Hardware: 48 hardened screws included for secure fastening
• Material: high-strength metal with protective finish to maintain integrity

Will these anchors resist rust and outdoor wear?

The anchors feature a protective black coating and zinc-plated components designed to slow corrosion and resist surface rust in typical outdoor conditions. Regular inspection and tightening of fasteners will keep the anchors performing longer in wet or marine-adjacent environments.

• Protective finish: black coating plus zinc plating on fasteners
• Recommended care: check for loose screws and surface wear periodically
• Suitability: designed for trailers, trucks, RVs and other outdoor gear

How easy is installation and what surfaces are compatible?

Installation is straightforward: align the bracket, use two 1/4" bolts or screws through the 0.28" holes, and tighten to the substrate. The anchors affix to wood and metal surfaces; for thin sheet metal or composite floors, add backing plates or structural reinforcement to achieve full rated capacity.

• Mounting hole diameter: 0.28" (approx. 1/4") for standard bolts
• Bracket dimensions: 2.44" x 0.79" for surface mounting
• Tip: use backing plates through plywood or thin metal to spread load

What kinds of straps and gear work with these D-rings?

The inner clearance and D-ring size accommodate common tie-down hardware including ratchet straps, cam straps, bungees, ropes and small chains. The ring folds flat when not in use, giving a low-profile anchor that still accepts most strap end fittings.

• Inner clearance: approx. 1" x 1 3/8" to fit strap hooks and fittings
• Compatible with: ratchet straps, cam buckles, bungee cords, ropes
• Fold-flat design: rings retract to reduce snagging and save space

Who is this for: Contractors, fleet operators, outdoor enthusiasts and DIYers who need multiple heavy-duty anchor points will find the VEEBELL 24-pack useful for securing equipment, motorcycles, cargo, kayaks and load-bearing gear. If you plan to secure heavy or shifting loads, or want the flexibility to add anchors at multiple locations on trailers, pickup beds, RVs or service vehicles, this kit provides a durable, corrosion-resistant and easy-to-install solution. Always install to suitable structural members, follow mounting best practices and inspect anchors regularly for wear or loosening.