4STEED MOTORS Power Steering Fluid Kit for Honda & Acura – Pack of 3 (36 fl oz) with Pump Inlet & Outlet O-Rings

Complete power-steering service kit: three 12 fl. oz. bottles of compatible power steering fluid plus inlet and outlet pump O-rings and dispensing cap for many Honda and Acura models.

This 4STEED MOTORS bundle gathers the fluids and small replacement seals most often needed when servicing a failing or leaking power steering pump on compatible Honda and Acura vehicles. The kit matches multiple OEM interchange numbers, supplies a practical three-bottle quantity (36 fl. oz. total) and includes both pump inlet and outlet rubber O-rings sized to fit the listed pump housings. It’s intended to make routine maintenance or a pump reseal straightforward without hunting down separate parts.

Which vehicles and part numbers does this kit fit?

This bundle was selected to match a wide range of Honda and Acura models and corresponding factory part numbers. Cross-reference the interchange numbers against your vehicle’s service manual or parts fiche before purchase.

• Compatible models include Civic, Accord, CR-V, Odyssey, Pilot, Ridgeline, MDX, TL, RDX, TSX, Prelude, Element, Integra, and CL (see full list in features).
• Interchange part numbers: 08206-9002A / 08206-9002 / 08206-9002PE and multiple OEM O-ring references such as 91345-RDA-A01 and 91370-SV4-000.
• Verify engine size and model year against the kit compatibility list prior to installation.

What exactly is included and why that quantity?

The kit supplies three bottles of power steering fluid plus two rubber O-rings and a dispensing cap, providing enough fluid for a typical reseal and some topping up. The included O-rings replace the inlet and outlet seals most prone to leakage during pump service.

• Three bottles, each 12 fl. oz. (total 36 fl. oz.) — effective for a pump flush and refill or multiple small top-offs.
• One inlet O-ring (size 13.0 x 1.9 mm) and one outlet O-ring (size 14.4 x 1.9 mm) to match listed pump housings.
• Dispensing cap included for cleaner pouring and reduced spill risk during service.

How do these O-rings and fluid help during a pump service?

Replacing worn pump O-rings and refilling with the correct fluid helps reduce leaks and restore proper hydraulic function when the rest of the steering system is in good condition. The parts in this kit are sized for direct replacement on the compatible pumps referenced.

• New O-rings restore a proper seal at the pump inlet and outlet where leaks commonly develop.
• The correct fluid volume ensures proper hydraulic pressure and reservoir levels after installation.
• Using OEM-equivalent interchange numbers simplifies matching parts to the original pump configuration.

Are there installation tips or things to check before you start?

Basic hand tools and a clean work area are usually sufficient; ensure the vehicle is cooled, steering components are supported, and you have a fluid catch container. Inspect hoses, pump mounts and the rack-and-pinion assembly for wear before reusing the system.

• Drain fluid into a suitable container and follow local disposal regulations for used hydraulic fluid.
• Clean mating surfaces and apply O-rings dry or with a light film of specified fluid for easier seating.
• Bleed the steering system per manufacturer instructions after refilling to remove air pockets.

Who is this for: This 4STEED MOTORS bundle is designed for DIY mechanics, independent repair shops and fleet technicians who work on Honda and Acura models listed in the compatibility section and who need a concise, OEM-referenced kit to reseal a power steering pump and refill the system. It’s ideal when you want matched O-rings and a practical fluid quantity to complete a pump service without sourcing multiple separate items.