AC PERFORMANCE 3/4" ID NBR Push-On Fuel Hose 2 ft Black — Non-Conductive, E85-Safe

AC PERFORMANCE 3/4" ID NBR push-on fuel hose is a 2-foot, non-conductive nitrile rubber line built for gasoline, ethanol blends (including E85), oils and coolant where push-on AN fittings are used.

This hose is engineered as a textile-reinforced, elastomer-covered nitrile (NBR) inner liner suited to automotive and small-engine fuel and fluid systems. It is made to accept 400 and 510-series push-on AN hose ends and performs across a wide temperature span, providing a reliable path for fuels and lubricants when installed with appropriate fittings and clamps.

What materials and dimensions define this hose?

The hose uses high-grade nitrile rubber (NBR) for chemical resistance to petroleum products and ethanol blends, with a textile reinforcement layer and elastomer outer cover for abrasion resistance. Inner diameter, outer diameter and length are specified so you can match it to your fittings and routing needs.

• Inner diameter: 3/4" (19.1 mm)
• Outer diameter: 1-1/32" (26.2 mm)
• Length: 2 feet (approximately 0.61 m)
• Material: Nitrile rubber (NBR) with textile reinforcement and elastomer cover

Which fluids and fittings can I use with this hose?

This line is designed for fuel system use including gasoline, E10 and E85, plus oils, lubricants and coolant. It is compatible with push-on AN fittings specifically in the 400 and 510 series; make sure the hose end and hose ID match for a secure push-on connection.

• Compatible fluids: gasoline, E10, E85, oils, lubricants, coolant
• Fitting compatibility: 400 & 510 series push-on AN hose ends
• Non-conductive construction — not for electrical grounding purposes

How does it perform under temperature and pressure?

The hose is rated to operate in a broad temperature window and withstands typical pressures found in many fuel and coolant circuits. For higher-temperature runs above 70°C, use a clamp at the fitting interface to preserve a leak-free connection over time.

• Operating temperature: -40°C to 100°C
• Working pressure: 280 PSI
• Burst pressure: 800 PSI
• Recommendation: add clamp when exposed to temperatures above 70°C

How should I prepare and install this hose for reliable service?

Cleanliness and proper assembly are crucial: always purge and inspect new hose before introducing fuel or fluids to remove manufacturing debris. Push-on installation is quick, but double-check seating and consider clamps in high-heat or high-vibration applications to prevent pull-off and leaks.

• Thoroughly clean the hose interior before first use
• Confirm hose ID matches push-on fitting series (400 or 510)
• Use clamps for runs where temperature exceeds 70°C or in high-vibration areas
• Inspect periodically for swelling, cracking, or hardening

Who is this hose for? This AC PERFORMANCE 3/4" ID NBR push-on hose suits mechanics, motorsport fabricators, DIY tuners and small-engine technicians who need a short length of ethanol-capable, oil-resistant fuel line that accepts common push-on AN fittings. It’s ideal when you require a non-conductive, textile-reinforced line for fuel, lubricant or coolant routing in vehicles, portable equipment and custom plumbing where a 2-foot run and 3/4" ID are the right fit. Always follow system pressure limits and installation best practices to ensure safe, durable performance.