Acymner Ball Joint Separator Kit — 5-in-1 Red Press-Type Pitman & Tie Rod Puller, Heat-Treated Steel with Carry Case

The Acymner 5-in-1 Ball Joint Separator Kit is a compact, heat-treated steel front-end service set that pulls pitman arms, tie rod ends and ball joints without damaging boots or surrounding components.

This all-in-one red kit brings a press-style separator, multiple pullers and heavy-duty forcing bolts together in a molded carry case so you can remove stubborn steering and suspension connections quickly and safely. Designed for garages, home mechanics and light-truck service, the set replaces fork-style splitters with a controlled, press action that preserves vulnerable rubber sleeves and steering parts.

How does the press-type ball joint separator protect boots compared with fork tools?

Unlike forked pullers that pry against the joint and can tear seals, the press-style separator pushes the stud out with steady force, directing load through the tool rather than the boot. That controlled action reduces the risk of ripping sleeves and avoids introducing contaminants into the joint.

• Press mechanism keeps force centered on the stud, not the boot
• Heat-treated drop forged steel resists deformation under heavy load
• Black-oxide forcing bolts reduce galling and corrosion for smooth operation
• Works on tight spaces where forked tools can slip or damage parts

Which components are included and when should I use each one?

The kit contains five specialized pieces plus a sturdy case: a press-type ball joint separator, a tie rod and ball joint remover, a conical pitman arm puller, a pitman arm/tie rod end puller, and a dedicated pitman arm puller. Use the conical puller for tapered pitman arms and the press separator for sealed ball joints and tie rod ends that must retain their boots.

• Ball joint separator — for pressed-in ball joints and sealed assemblies
• Tie rod/ball joint remover — for linkages and outer tie rod ends
• Conical pitman puller — for tapered splines and press-fit pitman arms
• Pitman arm puller — for heavier steering boxes and large-diameter arms
• Plastic carry case — organizes tools and protects threads and bolts

Will this set fit my vehicle and handle repeated use?

The Acymner kit is built for universal compatibility with most small domestic, import rear-wheel-drive vehicles and light trucks, covering common pitman arms, tie rods and ball joints. Heat-treated drop forged alloy and robust forcing bolts provide durability for repeated shop or home use.

• Universal sizes target common automotive steering and suspension connections
• Durable construction handles frequent use in a professional or DIY setting
• Black-oxide bolts resist rust and reduce thread wear over time
• Compact case keeps adapters and bolts organized for fast job changes

How do I use the pullers safely for best results?

Select the correct puller head for the joint, center the forcing bolt on the stud or pitman arm, and turn the bolt with the appropriate ratchet or wrench to apply steady pressure. Avoid hammering the tool body; the press action is designed to deliver controlled force to separate parts cleanly.

• Match puller type to joint (conical vs. press vs. tie rod adapter)
• Align the forcing bolt to the stud tip before tightening
• Use a torque or breaker bar only as needed—apply steady, even turns
• Keep threads clean and lightly lubricated for smoother operation

Who is this for: The Acymner Ball Joint Separator Kit is intended for home mechanics, mobile technicians and small repair shops that need a reliable, portable solution for front-end service. If you frequently replace ball joints, pitman arms or tie rod ends and want a toolset that reduces damage risk and speeds jobs, this kit is a practical addition to your toolbox.