Adam's Polishes Medium Grade Clay Bar Detailing Kit — 2 x 100g bars, safe on paint & glass for medium contaminants

This kit includes two 100-gram clay bars formulated to tackle smaller embedded particles that ordinary washing leaves behind. The medium-grade composition balances aggressiveness and safety so you can decontaminate paint, glass, and metal surfaces without excessive abrasion when used correctly. Use with a lubricant and light pressure to restore slickness, improve gloss, and prepare surfaces for sealants, waxes, or coatings.

What makes this medium grade clay different from fine or heavy clays?

The medium grade sits between ultra-fine and heavy clays, giving you more bite on medium contaminants while remaining safe for repeated use. It’s intended for paint that feels slightly rough after washing but doesn’t require aggressive claying. Compared with fine clay, it shortens detailing time on moderately contaminated panels and picks up particles that a fine bar might miss.

• Two 100 g bars allow work on several panels before replacement.
• Formulated to target medium-level bonded contaminants such as brake dust and industrial fallout.
• Less aggressive than heavy clay, reducing polishing needs afterwards.

How should I use these clay bars for best results?

Work on a cool surface in the shade and always use a generous clay lubricant to prevent marring. Knead the clay until tacky, glide it gently over the lubricated area with light, overlapping passes, and frequently fold or reshape the bar to expose clean clay. Stop when the panel feels smooth and follow with your chosen protection product.

• Spray liberal lubricant before each pass to avoid surface scratching.
• Use light, even pressure and short strokes across the paint.
• Refold clay every few swipes and replace when contaminated or torn.

Which surfaces can I safely clay with this kit?

The clay is suitable for automotive painted finishes, glass, polished metal, and chrome when used with proper lubrication and technique. Avoid using on unpainted matte finishes or severely chipped paint without testing first. If in doubt, test a small inconspicuous area to confirm compatibility.

• Painted automotive panels and clear coats — primary use.
• Glass and chrome for decontamination prior to protection.
• Not recommended on raw or textured plastics and delicate matte paints.

Who is this for: This kit is ideal for DIY detailers and professionals who need a reliable middle-ground clay to remove moderate bonded contaminants without overworking the paint. It’s particularly useful for vehicles that have seen regular use but don’t require aggressive heavy-claying — providing a fast path to a slick surface and better adherence for waxes, sealants, or ceramic coatings. The two-bar format gives enough product to address multiple panels or two full cars depending on contamination levels.