Aeagle 12" x 2" Electric Trailer Brake Kit — 2-Piece Left & Right for 5,200–7,000 lb Axles, Pre-Tested with Hardware

Aeagle 2-piece 12" x 2" electric trailer brake kit (left and right) for 5,200–7,000 lb axles delivers reliable stopping power and a full mounting kit for easy installation.

Whether you're upgrading worn components or building a trailer from the ground up, this Aeagle electric brake pair is engineered to fit common axle ratings and bolt patterns used by Alko, Dexter, Quality and similar manufacturers. The kit includes both left- and right-hand 12" x 2" assemblies plus hardware, and it uses non-asbestos linings designed to balance consistent friction and long service life. Each unit is tested before shipping and covered by a 12-month warranty, giving you a straightforward replacement option that matches standard flange PCDs and axle capacities.

Will these brakes fit my 5,200–7,000 lb trailer axle?

These brakes are designed to match many 5,200 lb, 6,000 lb and 7,000 lb axles that use a 3.88" brake flange pitch circle diameter (PCD). Check your existing brake flange measurement and axle rating to confirm compatibility before ordering.

• Fits axle ratings commonly listed as 5,200, 6,000, or 7,000 lbs.
• Brake flange PCD: 3.88" — measure to verify fit.
• Compatible with Alko, Dexter, Quality and similar brake flanges.
• Includes both left and right assemblies to replace an axle pair at once.

How easy is installation, and what hardware is included?

The kit comes with the bolts, nuts and spring pads needed to mount both brakes, which simplifies swapping out old assemblies. Basic hand tools and a safe, supported trailer are all you need for a typical installation; professional help is recommended if you're unsure about brake adjustment or wiring.

• Kit includes: 1x left 12" x 2" brake and 1x right 12" x 2" brake.
• Hardware: 10 bolts, 10 spring pads, 10 nuts — sufficient for typical flange mounting.
• Pre-tested units reduce guesswork at installation.
• Follow torque specs and wiring diagrams appropriate for your controller.

What materials and performance features should I expect?

Aeagle brakes use non-asbestos friction linings that provide stable braking performance and resist premature wear. The shoes and backing plates are built to withstand trailer service conditions and deliver predictable stopping behavior across a range of loads.

• Non-asbestos brake linings for consistent friction and durability.
• Complete assemblies reduce parts mismatch and installation time.
• Tested before shipping to ensure functionality on arrival.
• 12-month warranty covers manufacturing defects.

How do I maintain these electric trailer brakes for longevity?

Routine inspection, correct wiring, and periodic adjustment keep electric brakes operating properly. Look for even lining wear, secure hardware, and clean contact points; replace components at the first sign of cracking, glazing, or uneven wear.

• Inspect linings and hardware every few thousand miles or before long trips.
• Keep backing plates and wiring free of corrosion and debris.
• Adjust shoe-to-drum clearance per manufacturer recommendations.
• Swap both sides of an axle if one side shows heavy wear to maintain balance.

Who is this for: This Aeagle 2-piece 12" x 2" electric brake kit is aimed at trailer owners, DIY mechanics, and small fleet operators who need a reliable, bolt-on replacement for common 5,200–7,000 lb axles. It suits people upgrading worn brakes, performing axle rebuilds, or outfitting trailers where the 3.88" flange PCD and 12" x 2" drum size are standard. If you want a tested assembly that includes mounting hardware and a 12-month warranty, this kit is a practical choice.