AFA Tooling Approved for Automotive 2x8 Ramp Kit — Aluminum End Brackets, 1,500 lb Capacity, Rubber Grip Feet

The AFA Tooling 2x8 Ramp Kit converts standard 2x8 oak boards into portable loading ramps with machined aluminum ends, grooved rubber feet, and a combined 1,500 lb capacity.

This lightweight ramp kit is built for hobbyists and small equipment owners who need a compact, durable way to load ATVs, lawn tractors, snowmobiles and other wheeled gear. The kit pairs two machined aluminum brackets with a 2 x 8 hardwood plank (oak recommended) to create a stable ramp. Because wood thickness varies, the kit is engineered to fit 2 x 8 oak hardwood at 1.37 inches; other woods may require trimming for a snug fit. Each bracket is rated for 750 lb when used with the recommended oak board, delivering a 1,500 lb combined load limit.

How do these brackets turn a 2x8 into a safe ramp?

The brackets clamp over a 2 x 8 board to form the ramp endpoints, creating a continuous surface and preventing lateral slip. Machined aluminum construction provides rigidity while the integrated grip lines increase tire traction and foot purchase. High-quality bolts hold the assembly tight and grooved rubber feet reduce movement against the loading surface.

• Two machined aluminum end brackets that secure to a 2 x 8 oak board
• Grip lines on the bracket surface for improved traction
• Rubber grooved anti-slip feet to protect vehicle/van edges and reduce skidding
• Bolts and fasteners included for a firm, repeatable connection

What weight can the kit safely handle and how is capacity rated?

Each aluminum bracket supports up to 750 lb when paired with the recommended oak hardwood board, giving a total capacity of 1,500 lb for the assembled ramp pair. Capacity depends on the board material, its condition, and correct installation; oak hardwood at 1.37" thickness is the intended match. Avoid using softwood for heavy loads — softer species can flex or fail under repeated stress.

• Per-bracket rating: 750 lb with recommended oak 2 x 8
• Total paired capacity: 1,500 lb with two brackets and a proper board
• Load depends on wood species, thickness, and secure installation
• Not recommended to rely on softwood for frequent heavy use

How easy is it to use and transport for one person?

At roughly 7 pounds per bracket, the components are light enough for single-person handling, storage, and quick setup. The brackets slip onto the board and fasten with supplied hardware, so you can assemble or remove them in minutes. Their compact footprint makes them simple to carry in a truck bed or trunk, saving space compared with full folding ramps.

• Each bracket weighs about 7 lbs for single-person portability
• Fast assembly — slips onto a 2 x 8 board and secures with bolts
• Compact for storing in vehicle or garage when not in use
• Ideal for occasional loading where full-length ramps are unnecessary

What should I know about board selection and assembly?

Boards vary by species and milling; AFA Tooling designs this kit to pair with oak hardwood 2 x 8 boards at 1.37" thickness for optimal strength and fit. If you choose treated lumber or a softer species, measure thickness and be prepared to trim or shave the board ends so the brackets seat correctly. For heavier machinery, prefer hardwood and inspect the board for cracks, knots, or rot before each use.

• Recommended board: oak hardwood 2 x 8 at 1.37" thickness
• Softwoods or treated lumber may need trimming to fit securely
• Inspect boards for structural integrity before every use
• Do not substitute damaged or undersized boards for load-bearing use

Who is this for: The AFA Tooling 2x8 Ramp Kit is aimed at homeowners, landscapers, ATV and snowmobile owners, and anyone who needs a lightweight, storable ramp solution for occasional loading tasks. It’s a practical choice if you already have or can source oak 2 x 8 boards, want a fast single-person setup, and need a rugged aluminum bracket system with anti-slip feet rather than full folding ramps.