AFA Tooling Approved for Automotive Truck and Trailer Loading Ramp Kit — 2 x 12 Aluminum Brackets & Non-slip Feet

AFA Tooling's Truck and Trailer Loading Ramp Kit converts two standard 2 x 12 boards into a heavy-duty, removable ramp using machined aluminum brackets and non-slip rubber feet.

This kit supplies the aluminum hardware needed to build a wide, sturdy ramp for loading lawn mowers, ATVs, 4-wheelers and similar equipment into trucks or trailers. Instead of carrying full-length metal ramps, you attach the brackets to two oak 2 x 12 boards to create a broad, low-profile ramp. The components are lightweight for easy handling but engineered to give high capacity when paired with the recommended hardwood boards.

How strong and safe is the ramp kit?

The ramp hardware is designed for high load capacity when used with oak 2 x 12 boards. Each assembled side supports up to 750 lbs, giving a combined load rating of 1,500 lbs with the recommended hardwood, and the design includes non-slip rubbers and grip lines for traction.

• Rated capacity: 750 lbs per side; 1,500 lbs total with oak 2 x 12.
• Machined aluminum brackets provide structural support and resist bending.
• Grooved rubber anti-slip feet reduce movement and protect vehicle/trailer surfaces.
• Grip lines on brackets increase traction under wheel or foot contact.

What lumber should I use and are there fit considerations?

This kit is engineered to fit oak hardwood 2 x 12 boards, which measure about 1.37 inches thick in actual dimension. Softer or treated 2 x 12 lumber often varies in thickness; you may need to trim or shave the board ends for a proper fit and heavier loads should avoid softwoods.

• Recommended: oak hardwood 2 x 12 (actual thickness ≈ 1.37 inches).
• Softwood or treated boards may require end trimming to fit the brackets.
• Not recommended: softwood for heavy machinery due to lower strength.
• Follow measured fit before final assembly to ensure secure seating of brackets.

How easy is the kit to use and transport?

The components are lightweight — each bracket set weighs about 7 lbs — allowing one person to carry, install, and remove the ramps without assistance. Installation requires basic fastening of the brackets to the board ends and tightening the supplied bolts for secure operation.

• Single-person operation: brackets weigh roughly 7 lbs total for easy handling.
• Simple assembly: align brackets on 2 x 12 ends and secure with supplied bolts.
• Compact storage: hardware stows away flat when not in use.
• Designed for quick setup at trucks, trailers, or equipment bays.

What materials and features are included in the hardware?

The kit contains thick machined aluminum brackets, quality bolts, and grooved rubber feet engineered for traction and surface protection. The aluminum resists rust and bending, while the rubber feet help keep the ramp stable on vehicle or trailer edges.

• Thick, machined aluminum brackets with traction lines for wheel grip.
• High-quality bolts included for secure fastening to the board ends.
• Grooved rubber anti-slip feet for stability and to protect contact surfaces.
• Durable construction intended for repeated use and transport.

Who is this for? The AFA Tooling Truck and Trailer Loading Ramp Kit suits homeowners, landscapers, small-farm operators, and weekend riders who want a wide, stable ramp without hauling bulky metal ramps. It’s ideal for anyone who can supply two oak 2 x 12 boards and needs a portable, high-capacity solution for loading mowers, ATVs, UTVs, or snowmobiles. If you plan to use softer lumber or will regularly load very heavy equipment, choose hardwood boards and confirm fit before use.