Amarine Made 12V 60W Oil Change Pump Extractor — Red, Portable Battery-Powered Oil/Diesel Transfer with Hoses

The Amarine Made 12V 60W Oil Change Pump Extractor is a compact, battery-powered pump that safely evacuates and transfers oil or diesel from engines and gear housings for convenient on-site oil changes.

This lightweight 12V pump is designed to make routine fluid changes faster and cleaner without the need to lift vehicles or remove drain plugs. With a quiet 60W motor delivering about 0.8–1.0 L/min, the unit is built for portability and straightforward operation: hook up the inlet and outlet hoses, attach the battery clamps, and press the control to start pumping. The kit includes both inlet and outlet lines, hose locks, and clamps so you can use it across cars, motorcycles, ATVs, boats, RVs and yard equipment.

How does this pump perform for everyday oil changes?

The pump provides steady suction suitable for removing engine oil and diesel from many mid-size reservoirs. Its flow rate of roughly 0.8–1.0 liters per minute balances speed with control, and the motor draws about 5A at 12V for efficient battery operation. It’s intended for shorter jobs—avoid continuous runs beyond the recommended intervals to protect the motor.

• Motor power: 60W, draws 5A at 12V
• Flow rate: ~0.8–1.0 L/min for moderate-speed oil extraction
• Compact footprint: 8" L x 7" W x 4" H, about 1 lb
• Built-in quiet operation for garage or job-site use

What safety and usage steps should I follow?

To maintain safe operation, warm the engine oil to 104–140°F before pumping, then shut off the engine and make all hose and clamp connections. The pump is not designed for gasoline, water, gearbox oil, or other flammable liquids, and it must never run unattended for extended periods. Allow short cooling breaks during longer jobs to prevent overheating.

• Warm oil to 104–140°F, then turn engine off before extracting
• Do not pump gasoline, petrol, water, or flammable liquids
• Check hose direction and battery polarity before starting
• Limit continuous use; rest device after 10–20 minutes

Which vehicles and equipment is this pump compatible with?

This transfer pump is suitable for many small-to-medium engines and fluid reservoirs where suction extraction works well. It fits cars, motorcycles, scooters, ATVs, boats, RVs, lawn mowers, tractors, and similar equipment. Because suction strength is moderate, very large reservoirs or heavily viscous fluids may require longer run times or professional equipment.

• Automobiles, trucks, and SUVs (standard engine oil)
• Motorcycles, scooters, and ATVs
• Boats, marine engines, and small diesel systems
• Lawn equipment, tractors, and light industrial machinery

How easy is setup and what accessories are included?

Setup is straightforward: connect the inlet and outlet hoses to the pump, secure with the hose locks, attach the red and black battery clamps to the battery terminals, then press the control button to run. The kit comes ready to use with correctly sized hoses and clamps so you can begin work quickly and without extra purchases.

• Included: 1.5 m outlet hose and 1.2 m inlet hose
• Includes two hose locks and two battery clamps
• Plug-and-play 12V electrical connection for vehicle batteries
• Compact unit for easy storage and transport

Who is this for: The Amarine Made 12V 60W Oil Change Pump Extractor is aimed at DIY mechanics, boat owners, RV enthusiasts, landscapers, and small-fleet operators who want a portable, no-fuss tool for routine oil and diesel transfers. If you regularly service small engines or need a lightweight suction pump for on-site fluid changes, this kit delivers essential accessories and straightforward operation without a shop lift. For heavy industrial applications, very high-viscosity fluids, or prolonged continuous pumping, consider a high-capacity or dedicated commercial unit instead.