Amarine Made Oil Extractor Pump 12V 60W — Portable Quiet Electric Oil Removal for Cars, Motorcycles, Boats

The Amarine Made 12V 60W oil extractor is a compact electric pump that safely and quickly removes engine oil and other approved fluids from cars, motorcycles, boats, RVs and lawn equipment.

This portable oil transfer pump combines a lightweight, quiet 60W motor with easy-to-connect hoses and battery clamps so you can perform routine fluid changes without crawling under the vehicle or relying on messy siphons. It’s designed for convenience at home, in the garage or out in the field and includes the hoses and clips needed to start most oil changes right away.

How fast and powerful is this pump for routine oil changes?

The pump runs on 12V with a 60W motor and draws about 5A, delivering roughly 0.8–1.0 liters per minute under normal conditions. That flow is enough to clear most oil pans and reservoirs in a few minutes while remaining quiet and stable during operation.

• Rated flow: approximately 0.8–1.0 L/min for steady extraction
• Power: 12V DC, 60W motor, 5A current draw
• Compact footprint: about 8" x 7" x 4", weighs ~1 lb for portability
• Quiet operation suitable for home and small professional use

What fluids can I use this pump with and what should I avoid?

This unit is intended for motor oils and diesel-type fluids commonly found in engines and geared systems; it is not compatible with gasoline, petrol, water, gearbox oil, or any flammable liquids. Following the stated fluid limitations ensures safe operation and prevents damage to the motor and seals.

• Suitable: engine oil, diesel engine fluids, most motor oils
• Not suitable: gasoline/petrol, water, flammable liquids, gearbox oils
• Always warm oil first (104–140°F) for easier extraction
• Check hose orientation and secure clamps before starting

How do I set it up and operate the Amarine Made oil extractor?

Setup is straightforward: attach the inlet and outlet hoses, clamp the battery lead with red to positive and black to negative, confirm hose locks, then operate the power button. For best results, warm the engine to recommended temperature, turn off the engine, then begin pumping. Observe the recommended run limits to avoid overheating the unit.

• Included accessories: inlet hose (1.2 m), outlet hose (1.5 m), 2 hose locks, 2 battery clamps
• Connect hoses to proper inlet/outlet ports and lock them securely
• Attach battery clamps (red = +, black = -), then press the power button
• Do not run more than 30 minutes continuously; pause after 10–20 minutes

What safety tips and limits should I know before use?

Before pumping, warm the oil to the suggested range (104–140°F) and always shut the engine off before extraction. Limit continuous run times to prevent motor overheating and never use the pump with incompatible or flammable liquids.

• Warm oil first and shut engine down before pumping
• Maximum continuous use: do not exceed 30 minutes; rest recommended after 10–20 minutes
• Avoid extensions—do not add extra tubes beyond provided hoses
• Verify hose directions and battery polarity before pressing the button

Who this is for: DIYers, small-fleet owners, boaters and landscapers who perform their own maintenance will appreciate the Amarine Made oil pump for quick, mess-reducing fluid changes. It’s a practical choice for anyone needing a lightweight, portable extractor to remove oil from cars, motorcycles, RVs, boats, tractors and lawn equipment without specialized shop tools.