ApplianPar Rear Adjustable Slam Lowering Kit for 2002–2016 Harley Touring — 1"–3" Drop, Bolt‑In Fit

The ApplianPar 1"–3" Rear Adjustable Slam Lowering Kit gives Harley-Davidson Touring owners a safe, adjustable way to drop the rear ride height for a slammed, custom stance while preserving handling and clearance.

The ApplianPar Rear Adjustable Slam Lowering Kit is engineered for 2002–2016 Harley-Davidson Touring models, including Street Glide, Electra Glide, Ultra Classic and Road King (with hard saddlebags). It replaces or modifies the rear suspension mounting geometry to lower the bike 1 to 3 inches, letting riders achieve that low-profile look and improved flat-foot reach without permanently altering factory components. The kit is designed for bolt-in installation with common hand tools and is built to work within the specified model years and configurations.

How does the lowering kit change ride height without compromising rear suspension travel?

This kit adjusts the rear mounting points and shock position to lower the chassis while keeping adequate suspension functionality. By providing a controlled 1"–3" drop, it helps maintain shock stroke and preload options so you can tune for load and comfort. The result is a lower center of gravity with preserved wheel travel when installed per instructions.

• Adjustable range: 1" to 3" drop to suit rider preference
• Works with original shock absorbers and mounting hardware
• Designed to retain sufficient rear suspension stroke for safety and comfort

Which Harley-Davidson models and years are compatible with this kit?

ApplianPar designed this lowering kit specifically for Harley-Davidson Touring bikes built between 2002 and 2016. It fits Street Glide, Electra Glide and Ultra Glide models across those years, and Road King models fitted with hard saddlebags. Always verify your bike’s year and saddlebag configuration before purchase to ensure fitment.

• Compatible years: 2002–2016 Harley-Davidson Touring series
• Included models: Street Glide, Electra Glide, Ultra Glide
• Road King compatibility: only Road King bikes with hard saddlebags

What parts and tools are needed, and how difficult is installation?

The kit typically includes the lowering brackets and hardware required to install the new rear geometry; shocks are reused unless you opt to upgrade. Installation is a moderate DIY job for a mechanically inclined rider and can be completed with standard hand tools and a service manual or torque specs. For riders without experience, professional installation at a motorcycle shop is recommended to ensure correct alignment and torque.

• Included: lowering brackets and mounting hardware (check product box for specifics)
• Tools commonly required: socket set, torque wrench, jack or lift
• Skill level: moderate—professional install recommended if unsure

What should I check after installing the lowering kit?

After installation, confirm rear wheel alignment, torque settings, and that the shocks have sufficient travel under load. Ride cautiously at first to verify handling and braking feel, and recheck fasteners after the first short ride. If you changed preload or ride height significantly, adjust front suspension or controls as needed for balance.

• Verify wheel alignment and torque on all fasteners
• Confirm shock travel clearance under compression
• Re-test ride and re-torque after initial use

Who this kit is for: The ApplianPar 1"–3" Rear Adjustable Slam Lowering Kit is aimed at Harley-Davidson Touring owners (2002–2016) who want a lower stance for improved ground reach and custom appearance without permanently altering factory shocks. It suits riders who prefer a controlled, adjustable drop and either want a DIY installation or a professional shop fit. Not recommended for models outside the listed years or Road King bikes without hard saddlebags.