ARANA 15" Gas Struts 20 lb — 2-Pack ML1320/C16-15064 for Boat Lockers, Smooth Dampened Lift

ARANA C16-15064 ML1320 are a pair of 15" gas struts rated at 20 lb each, designed to replace or upgrade boat lockers, toppers, camper shells and similar hinged panels.

These two gas springs deliver controlled lift and support for lids and access panels where a compact, reliable prop is needed. Built to common interchange dimensions, they offer a straightforward swap for many OE and aftermarket models — just confirm the center-to-center lengths and interchange numbers before ordering. They suit marine and outdoor storage applications and simple DIY projects where predictable opening and holding force matters.

How do I know these struts will fit my hatch or locker?

Start by measuring the center-to-center length of your current strut when fully extended and when compressed if possible. Compare your measurements and any printed part numbers to the interchange list to confirm compatibility; the ARANA pair follows standard ML1320/C16-15064 sizing.

• Extended (center-to-center): 15" (381 mm)
• Compressed (center-to-center): 8.90" (224 mm)
• Force per strut: 20 lb (≈89 N)
• Cross-reference numbers: ML1320, C1615064, 3858LW, among others

What holding power and motion behavior should I expect?

Each strut supplies about 20 pounds of push force, giving gentle, controlled opening and reliable hold for moderately weighted lids. They reduce sudden drops and help keep panels stable partway open, but are not designed as a permanent lock — pair with latches for secure closure.

• Smooth, gas-damped extension and retraction
• Best for loads roughly 15–22 lb per lid for optimal support
• Two-strut kit provides balanced lift for larger or wider panels
• Designed to compress only after correct installation

Can I use these on boats and outdoor equipment safely?

Yes — these struts are suitable for marine lockers, boat storage boxes, toppers and similar outdoor enclosures when mounted correctly. Use stainless or marine-grade mounting hardware if your environment exposes fittings to saltwater or heavy moisture to avoid corrosion.

• Common applications: boat lockers, camper shells, Leer toppers
• Recommended hardware: corrosion-resistant ball sockets or brackets
• Inspect seals and attachments periodically in marine use
• Avoid exposure to extreme heat sources that may affect performance

How should I prepare and install the ARANA gas springs?

Confirm measurements, remove the old struts, and mount the new ones with the rod end pointing down when closed for best seal life. Tighten ball joints or brackets to the manufacturer’s torque recommendations and check that the lid opens smoothly; the struts will compress only after installed correctly.

• Verify interchange number and dimensions before purchase
• Install with rod (piston) end downward when closed, if possible
• Use matching ball studs or brackets sized for the strut sockets
• Test the fitted panel through its full motion; re-torque as needed

Who is this for? If you maintain small boats, campers, truck toppers or build DIY storage lids and need dependable, standard-dimension gas supports, this ARANA two-pack is aimed at you. It’s ideal for hobbyists and professionals replacing worn OE struts or upgrading lids that require moderate lift force. Always double-check length and interchange numbers before installing to ensure a correct fit and smooth operation.