ATLIKE 12V 100W Oil Extractor Pump — Electric Self‑Priming Oil Change Pump, 1–4 L/min for Cars & Mowers

The ATLIKE 12V 100W Oil Extractor Pump is a portable, self‑priming electric unit that pulls engine oil, gear oil, and transmission fluid through a dipstick tube for fast, hands‑free fluid changes.

If you perform routine maintenance on cars, lawn mowers, boats, or small engines, this 12V extractor lets you remove oil without crawling under the vehicle or wrestling with drain pans. The pump connects to any 12V battery, provides a steady 1–4 L/min flow, and includes controls to start and stop extraction instantly. It is designed for common automotive viscosity grades (0W‑20, 5W‑20, 5W‑30) and many transmission fluids; avoid heavy industrial oils to prevent overloading the motor.

How does the ATLIKE pump make oil changes easier?

The pump draws oil up through the dipstick tube so you can leave the vehicle on level ground and skip messy drain pan handling. Because it’s electric and self‑priming, it keeps extraction steady without continuous manual effort.

• Hands‑free operation once the hose is positioned
• Self‑priming so it starts without manual suction
• Stop/start switch prevents spills and overfilling
• Connects to a standard 12V battery or accessory outlet

Which fluids and engines are suitable for this extractor?

This model is optimized for typical automotive engine oils and standard transmission fluids. It works well on cars, motorcycles, small marine engines, lawn equipment, and many ATVs, but it’s not recommended for very thick or industrial‑grade oils that could stall the pump.

• Recommended: SAE 0W‑20, 5W‑20, 5W‑30 and similar viscosity oils
• Also suitable for many standard transmission and gear fluids
• Not recommended for very high‑viscosity fluids or dense hydraulic oils
• Best results when engine is warm (oil flows easier)

How fast and reliable is the extraction process?

The ATLIKE 100W motor delivers a controlled flow in the range of 1–4 liters per minute, balancing speed with safe, steady suction to avoid air lock or hose slip. The built‑in switch gives immediate control, so you can stop extraction at the correct volume without making a mess.

• Flow rate: approximately 1–4 L/min depending on fluid temperature
• Self‑priming feature reduces start‑up hassle
• On/off switch for precise stopping to prevent overflows
• Durable pump housing for repeated DIY use

What accessories and maintenance should I expect?

The pump typically ships with suction tubing sized for dipstick tubes, a discharge hose, and battery clamps or a 12V plug. Routine care is minimal: flush the pump after use if switching fluid types and store dry to extend service life.

• Included: suction hose for dipstick, discharge hose, 12V power connection
• Flush with compatible solvent if changing fluid types
• Inspect hoses and clamps for wear before each use
• Store in a dry place to protect electrical components

Who is this for? The ATLIKE 12V 100W Oil Extractor Pump is aimed at DIYers, hobby mechanics, small‑fleet operators, and boat owners who want a cleaner, faster way to remove engine or transmission fluids without professional tools or lifting equipment. If you regularly change oil on cars, mowers, ATVs, or marine lower units and prefer a portable, battery‑powered tool, this pump simplifies maintenance and reduces spills while saving time.