BANVIE Car Alarm System with Remote Engine Start & Push-Button Start — 12V, 1-Way Alarm & Keyless Entry

This all-in-one unit replaces or supplements factory systems to give your vehicle remote locking, panic/car-finder, trunk release, automated central locking and a keyless push-to-start experience. The kit is built around a DC 12V main module and a CR2032-powered remote that communicate on 433–434 MHz. It’s designed to improve convenience on cold mornings and busy days while offering basic shock, door and ACC-triggered alarms.

How does the remote start and push-button start work?

The BANVIE system lets you start and stop the engine from the remote and switch to a push-button start on the dash. Remote engine start runs the vehicle remotely and will automatically cut off after 15 minutes if the foot brake isn’t pressed, preventing unattended operation. The push-to-start button enables keyless ignition when the system is correctly installed.

• Remote engine start/stop from the fob for preheating or cooling
• Push-button keyless start and stop on the dashboard
• 15-minute automatic engine shutoff unless brake pedal is pressed
• Hold-button start/stop requirement to prevent accidental triggering

What security and alarm features protect my car?

This is a 1-way alarm system that notifies via siren when the vehicle detects shocks, illegal door opening or ACC tampering. The siren patterns differ by event—short alarms for body shock and longer alarms for door or footbrake-triggered events—helping you recognize the warning type at a glance. An emergency override and installer code learning are included for safe service and customization.

• Shock detection and side-door/ACC-trigger alerts with distinct siren durations
• Panic/car-finder feature to locate your vehicle quickly
• Emergency override to safely disarm the system if needed
• Installer code learning for tailored setup and integration

Can it integrate with existing vehicle systems and accessories?

The BANVIE module supports central door locking automation and can trigger a window closer if that accessory is installed. For vehicles with chip keys or factory immobilizers, an optional bypass module (sold separately) is usually required to permit remote engine start. The wiring and programming options let a professional installer adapt the system to many makes and models.

• Central door locking automation and trunk release via remote
• Optional window-closing function when a window closer is present
• Immobilizer bypass required for chip-key cars (bypass module sold separately)
• Installer guide and code-learning for compatibility tuning

What are the key technical specs and installation notes?

The main unit runs on DC 12V ±3V with a static draw ≤15mA and operates on 433–434 MHz. The remote uses a CR2032 battery and low static current, making it long-lasting under normal use. Professional installation is recommended to ensure correct bypass wiring and safe integration with your vehicle’s electrical systems.

• Main unit voltage: DC 12V ±3V; ACC/start current rated 30A
• Remote battery: CR2032; working frequency 433–434 MHz
• PKE emission current 40mA; static current ≤15mA for main unit and remote
• Recommended professional installation and optional immobilizer bypass module

Who is this for? The BANVIE Car Alarm System suits drivers who want a straightforward aftermarket upgrade for remote start and keyless push-button ignition combined with basic alarm protection. It’s ideal for owners of older vehicles that lack factory remote start, fleet or commuter drivers who want pre-conditioned cabin comfort, and anyone comfortable arranging professional installation or working with an installer to add an immobilizer bypass when required. Note: the remote does not include a silent-arm function, so audible alerts remain part of the system’s security feedback.