Bolvixor Recessed D-Ring Tie Down Anchors 4-Pack — 6000 lb Galvanized Flush-Mount with 6.5" Backing Plates

Whether you haul ATVs, motorcycles, furniture, or heavy pallets, reliable anchor points on a trailer or truck bed make the difference between safe transport and shifting loads. These Bolvixor recessed D-rings are built to sit flush when not in use, lift when needed, and spread load stress across a large backing plate to protect wooden or metal floors. The kit arrives ready to install so you can add robust tie-down points without extra trips to the hardware store.

How strong are these anchors and what does the 6000 lb rating mean?

Each D-ring assembly is engineered with a 6000-pound break strength rating, reflecting the maximum force the mounted assembly can withstand before failure when properly installed. That rating applies to the entire mounted assembly, including the ring, face plate, backing plate, and fasteners tightened to recommended torque.

• 6000 lb assembly break strength per anchor for heavy loads.
• Solid galvanized steel construction resists rust and outdoor corrosion.
• Large backing plate spreads load to reduce pull-through risk.
• Rating assumes correct bolt pattern, hardware use, and substrate strength.

How do these recessed D-rings install and what hardware is included?

The Bolvixor kit comes complete with the face plates, 6.5" x 6.5" backing plates, and the necessary mounting bolts and screws so you can bolt them in place right away. They are designed for bolted installations through wood, metal, or composite trailer floors when paired with the backing plate on the underside.

• Includes face plates, backing plates, and mounting bolts/screws for a full install.
• Cutout and bolt pattern sized for a secure, flush fit on flat surfaces.
• Backer plate reduces localized stress and prevents bolt pull-through.
• Installation requires common tools: drill, socket set, and torque wrench.

Will the flush design interfere with loading or create trip hazards?

The D-ring sits completely flush when stowed, eliminating a raised obstruction while rolling vehicles or sliding cargo over the floor. When you need a tie-down point, the ring lifts up easily to accept straps, chains, or hooks and then folds back down to a low profile.

• Flush-mount face plate keeps floor profile flat for vehicle movement.
• Ring pivots up for fast access, then lays flat to avoid snags.
• Low-profile design reduces tripping or interference with cargo placement.
• Galvanized finish adds durability for repeated use and outdoor exposure.

What types of vehicles and loads are these D-rings best for?

These recessed anchors suit a wide range of hauling setups: utility and enclosed trailers, pickup beds, flatbeds, RVs, and workshop or warehouse floors where secure tie points are needed. They are intended to anchor straps and chains to stabilize motorcycles, ATVs, equipment, furniture, and heavy palletized loads during transit.

• Commonly used for ATVs, UTVs, motorcycles, and small vehicle transport.
• Good for securing furniture, appliances, and palletized freight.
• Works in trailers, truck beds, flatbeds, and enclosed cargo areas.
• Must be installed into structurally sound flooring for rated performance.

Who is this for: Bolvixor recessed D-ring anchors are aimed at owners and operators who need dependable, low-profile tie-down points for heavy or shifting loads — from weekend riders and moving professionals to contractors and fleet operators. If you want strong, corrosion-resistant anchors that reduce floor damage and install with included hardware, this kit provides a practical, ready-to-mount solution.