BOSRUIDA Washer Suspension Rod Kit W11130362 for W10748956 W11033491 - 4 Zinc Rods, Springs & Bushings

BOSRUIDA W11130362 is a complete washer suspension rod kit that replaces worn suspension hardware to stop vibration, shaking and noise during spin cycles.

When a top-load washer shows unbalanced rotation, loud rattling, or the UL fault code, the suspension rods and related hardware are often the worn components. This BOSRUIDA kit contains everything needed to restore the drum’s support: four zinc-plated suspension rods, four suspension balls, and four bushings. The rods are zinc metal for durability, the top springs use hardened spring steel, and the outer parts are molded ABS to resist wear and moisture.

How will replacing the suspension rods affect washer performance?

Installing fresh suspension rods stabilizes the tub during agitation and spin, reducing lateral movement and the symptoms that trigger error codes. Proper support helps prevent damage to bearings and the cabinet, extending the machine’s usable life when fitted correctly.

• Replaces worn or bent W11130362-series rods that cause vibration.
• Reduces noise and shaking during spin cycles when all four rods are replaced.
• Restores correct drum alignment to limit strain on motor and bearings.
• Includes springs and bushings to rebuild the suspension pivot points.

Which washer models are compatible with this BOSRUIDA kit?

This suspension rod set fits a range of top-load Whirlpool and compatible models referenced by OEM part numbers. Verify match by comparing part numbers or the physical rod design before purchase to ensure proper fit.

• Compatible with W10748956, W11033491, W11228718 and W11130362 replacements.
• Also listed for MVWC555DW0, MVWC565FW0/1, MVWX655DW0 and similar models.
• Cross-references include 11022352510, 11025132410, 11025132411 and AP6262443.
• Check your machine’s service manual or existing rod markings for confirmation.

What’s included and what tools are recommended for installation?

The kit arrives as a full suspension hardware set so you can replace all four mounting points in one repair job. Basic tools and safety measures will make the swap straightforward; if you’re unsure, review instructional videos or consult a technician.

• Included: 4 suspension rods, 4 suspension balls, 4 bushings — ready to install.
• Material notes: zinc rods, spring steel top springs, ABS components for the housings.
• Suggested tools: gloves, screwdriver, putty knife, tape, straps to secure the tub.
• Watch model-specific YouTube guides for step-by-step visual help.

How can I tell if the suspension rods are the problem?

Common signs include persistent vibration, loud banging during spin, an unbalanced drum, or the washer showing a UL/unbalanced fault despite load adjustments. Visual wear or a collapsed spring is a clear indicator that the suspension assembly needs replacing.

• Symptoms: excessive shaking, banging sounds, or the UL fault code during spin.
• Inspect for bent rods, corroded springs, or cracked ABS housings.
• Replacing all four rods at once gives balanced support and consistent results.

Who is this for: The BOSRUIDA W11130362 suspension rod kit is for DIY homeowners, appliance repair technicians, and parts resellers who need a complete hardware replacement for top-load washers listed above. It's a practical repair solution when vibration, noise, or unbalanced spin threatens drum alignment or leads to repeated fault codes. If you want to restore stable operation without replacing the entire washer, this kit supplies the metal rods, springs, balls and bushings required for a full suspension rebuild.