BRCOVAN Motorcycle Fork Stem Phone Mount — Fork‑tube Cradle with Vibration Dampener, Fits 5.4"–6.9" Phones

BRCOVAN's Motorcycle Fork Stem Phone Mount is a rugged, fork-tube-mounted cradle with vibration damping that secures smartphones (5.4"–6.9") for confident riding.

This motorcycle phone mount attaches to the fork stem tube and combines a heavy-duty composite frame, industrial-grade springs and a dedicated vibration dampener to keep your phone steady on rough roads. It ships with spacers and an aluminum alloy base so you can fit a wide range of fork tube diameters (12mm–25.4mm) and seat the mount safely without specialized tools. Soft silicone contact points protect the phone finish, while a 720° ball joint lets you position the screen exactly where you need it.

How does the mount prevent shaking and protect my phone camera?

The mount uses a combination of stiff composite housing, reinforced springs and a purpose-built vibration dampener to absorb shocks before they reach your device. Silicone padding at each contact point prevents scratches and keeps the camera area clear of pressure.

• Industrial springs lock the phone in a tight, anti-shake grip.
• Dedicated vibration dampener reduces high-frequency engine and road vibration.
• Non-contact camera area avoids camera lens rubbing or compression.
• Silicone pads cushion the phone and protect finishes during bumpy rides.

Will this fit my motorcycle's fork stem and phone size?

Yes — the included aluminum fork-base and a set of spacers let the mount clamp tube diameters from 12mm up to 25.4mm, with a minimum tube depth requirement of 38mm. The cradle expands to accept most modern phones up to 88mm wide and 175mm long, including phones inside thin cases.

• Fork tube compatibility: 12mm–25.4mm diameter with spacer selection.
• Minimum fork tube depth: 38mm required for secure installation.
• Phone size supported (with case): max width 88mm, length 175mm, thickness 16mm.
• Recommended screen diagonal range: approximately 5.4" to 6.9" devices.

How easy is installation and daily use?

Installation is straightforward: choose the correct spacer for your fork tube, bolt the aluminum base, and clamp the cradle. Daily operation is quick thanks to one-handed insertion and release, and the 720° rotation ball lets you switch between portrait and landscape instantly.

• Quick one-handed phone insertion and removal for short stops.
• 720° rotation for flexible viewing angles and mounting positions.
• All necessary mounting hardware included in the package.
• Simple pre-install checklist prevents common fit issues.

What should I check before buying or fitting this mount?

Measure the fork stem tube diameter and confirm there is at least 38mm of uninterrupted tube depth. Do not attempt to fit if the fork stem bore has a raised lip or flange that prevents the base from sitting flush.

• Confirm fork tube diameter and choose proper spacer from the kit.
• Ensure fork tube depth is a minimum of 38mm for safe anchoring.
• Check for lip or obstruction in the fork stem hole; avoid installing if present.
• Verify your phone dimensions against the cradle's maximums (88×175×16mm).

Who this fitment is for: Riders who need a robust, fork-stem-mounted phone cradle for daily commuting, touring or off-road use will appreciate this model. It suits motorcyclists who prioritize vibration control, simple one-handed operation and broad compatibility with modern smartphones and most fork tube sizes. If you require a clamp-style mount for nonstandard forks or need a waterproof enclosed case, consider alternative mounting options.