caqeg 12GPM 12V Fuel Transfer Pump – Red portable kit with automatic nozzle & particulate filter

The caqeg 12GPM DC 12V fuel transfer pump is a portable, explosion‑proof pump kit that moves gasoline and diesel quickly and safely using a 12‑volt vehicle power source.

This compact pump package includes an automatic shutoff nozzle, hose, and particulate filter for cleaner fuel transfer without relying on mains power. Built for mobile use, the unit delivers up to 12 gallons per minute from a sealed cast‑iron pump chamber and carries thermal protection and bypass features to reduce overload. It’s supplied new and factory‑tested with diesel so you receive a proven, ready‑to‑install tool for on‑site refueling, fuel transfer, and maintenance tasks.

How fast and how far can this pump move fuel?

The caqeg pump provides a high flow rate while maintaining practical suction and head limits for typical transfer jobs. Expect up to 12 GPM flow, a maximum lift (head) of 33 feet, and a suction capability around 6.6 feet under recommended installation conditions.

• Flow rate: up to 12 gallons per minute for fast transfers.
• Maximum head: 33 feet for pressurized delivery to higher containers.
• Maximum suction lift: approximately 6.6 feet for pulling fuel from lower sources.
• Electrical draw: nominal 15 A, max 18 A on a 12 V DC supply.

Is this safe to use around vehicles and fuel storage?

The pump uses explosion‑proof components and a sealed cast‑iron pump chamber to lower ignition risk during operation. It also includes thermal protection and an integrated bypass to prevent overheating and to stop the motor if conditions exceed safe limits.

• Explosion‑proof parts and design minimize spark risk near flammable liquids.
• Thermal protection automatic stop helps prevent motor damage from overload.
• Bypass feature allows intermittent operation up to a few minutes to stabilize flow.
• Not intended for E85 fuel or water transfer—strictly gasoline and diesel only.

How do I install and operate the kit for reliable performance?

Installation is straightforward: connect the 12 V battery clamp to a suitable vehicle battery, attach hose and nozzle, and seal threaded joints with PTFE (Teflon) tape. The automatic nozzle stops flow when the receiving tank is full, making transfers cleaner and easier.

• Power: connect to any 12 V vehicle battery using the included clamps.
• Threaded connections: apply PTFE tape to NPT threads to prevent leaks.
• Nozzle type: automatic shutoff nozzle reduces overfills and spills.
• Filter: built‑in particulate filter protects pumps and downstream equipment.

What maintenance and limitations should I plan for?

Routine checks and simple care will keep the pump working reliably: inspect the filter, hose, and connections for wear, and avoid pumping corrosive or alcohol‑blended fuels such as E85. The unit is tested with diesel at the factory, so slight residual odor or minor assembly marks do not indicate prior use.

• Check and clean/replace the particulate filter regularly.
• Avoid pumping water, solvents, or ethanol‑heavy fuels (E85).
• Inspect hoses, clamps, and electrical leads before each use.
• Store in a dry, ventilated area away from direct heat when not in use.

Who is this for: The caqeg 12GPM 12V fuel transfer pump kit is aimed at contractors, fleet operators, farmers, marine users, and DIY mechanics who need a rugged, portable solution for moving gasoline or diesel without mains power. It’s ideal when you require fast throughput, a shutoff nozzle to prevent spills, and a compact pump that runs from any 12 V vehicle battery. If you need a pump for E85, water, or continuous industrial duty beyond its thermal limits, choose a model designed specifically for those fluids or higher duty cycles.