CAREFREE RV Awning Front Spring Assembly Right-Hand 8'–18' White — Fits Fiesta, Spirit FX, Simplicity, Restores Tension

A direct-fit CAREFREE front spring assembly that replaces the right-hand rollout spring for 8'–18' Fiesta, Spirit FX and Simplicity RV awnings in white.

If your RV awning won’t retract or the fabric is loose along the roller, swapping the front spring assembly restores proper tension and smooth operation. This replacement part fits a broad range of Carefree Fiesta, Spirit FX and Simplicity models from 1997 to present where the arm-to-arm measurement is between 8 and 18 feet. The unit ships without pre-applied tension and is finished in the updated white (2012 color update) to match many current awning rollers.

How do I know this spring assembly fits my awning?

Measure the distance from the center of one arm pivot to the center of the opposite arm pivot. If that measurement falls between 8' and 18', and your awning is a Carefree Fiesta, Spirit FX, or Simplicity manufactured from 1997 onward, this right-hand spring assembly is designed to be compatible.

• Fits center-of-arm to center-of-arm widths: 8' to 18'.
• Compatible models: Fiesta, Spirit FX, Simplicity (1997–present).
• Hand orientation: right-hand replacement only.
• Color: white (2012 update) to match modern rollers.

What safety steps should I follow when replacing the roller spring?

Roller springs store a large amount of mechanical energy and can unwind suddenly if released incorrectly. Follow manufacturer guidance, use the right tools, and keep a clear workspace to reduce risk of injury or damage to the awning fabric and roller.

• Always release tension slowly; do not remove the spring while under load.
• Wear safety glasses and gloves; stand clear of the axis line during unwinding.
• Use proper winding tools or seek a professional technician if unsure.
• Verify the replacement ships with no tension and wind per instructions.

What is included and what condition is the assembly shipped in?

The package contains the complete front spring assembly configured for the right-hand side and delivered without pre-tension. That lets you wind the spring to the correct tension during installation to match your awning length and fabric condition.

• Complete replacement spring assembly ready for installation.
• Shipped with no tension applied for safer handling and transport.
• White finish (2012 update) for better visual match with newer awnings.
• Hardware or detailed instructions may not be included—check your vehicle manual.

Who should install this part and what tools are typically required?

Because of the stored energy in roller springs, installation is best handled by someone with awning experience or a professional RV technician. If you choose DIY, prepare the correct winding tools and follow safe winding/unwinding practices.

• Recommended installer: experienced DIYer or professional technician.
• Common tools: awning winding tool, socket set, safety equipment (gloves, eye protection).
• Expect to wind spring during installation to set correct tension for awning length.
• Allow time to bench-test operation before fully mounting the awning back on the RV.

Who is this for: This CAREFREE replacement front spring assembly is intended for RV owners and service shops who need a direct replacement part to restore tension and normal operation to a right-hand 8'–18' Carefree Fiesta, Spirit FX or Simplicity awning. It suits people comfortable with mechanical repairs or technicians who regularly service RV awnings and want a properly sized, up-to-date white spring assembly that matches modern rollers.