CARPRO Eraser Ceramic Coating Prep - 1L Polish & Oil Remover, Anti-Static, Silicone-Free

CARPRO Eraser is a concentrated polish and oil remover formulated to strip polishing oils, fillers and surface contaminants so ceramic coatings like CQUARTZ bond to bare, clean paint.

Before applying any professional ceramic coating, paint must be free of residual polishing lubricants, dust and invisible oils that block adhesion. CARPRO Eraser is designed as a final wipe-down product to dissolve and lift polishing oils and fillers, neutralize static dust attraction, and leave a silicone-free surface ready for coating. The solution comes in a 1-liter bottle and is often paired with a spray head for controlled application during detailing or shop prep.

How does Eraser remove polishing oils and residues?

Eraser contains solvents and surfactants tuned to break down common polishing lubricants and fine polishing fillers without abrading the finish. It dissolves residues on the surface and carries them off with a microfiber towel, revealing paint that’s chemically clean for coating. Use it as the last wipe after final polishing and clay-bar steps.

• Dissolves polish oils and light fillers for easier removal
• Works quickly — wipe and inspect immediately
• Safe on cured paint when used as directed (non-abrasive)
• Leaves no oily film that can hinder coating cure

Will Eraser reduce dust and static during coating application?

Eraser includes anti-static additives that lessen the attraction of airborne dust during the critical coating window. After wiping, treated panels show reduced dust pickup compared with plain solvent wipes, giving you more time to lay down a coating without re-cleaning. This is especially useful in non-cleanroom environments.

• Anti-static formula reduces dust adherence after application
• Helps maintain a cleaner work surface during coating
• Reduces the need for repeated final wipes

Is CARPRO Eraser safe for paint, glass and trim?

Eraser is formulated without silicone and is safe for paint, glass and many exterior surfaces when used as directed. It also performs as an effective glass cleaner and degreaser, leaving a streak-free finish. Avoid prolonged dwell on unsealed plastics and always test in an inconspicuous area if unsure.

• Silicone-free — compatible with paint shops and body shops
• Effective on glass, wheels and tires as a degreaser
• Quick evaporation minimizes residue if wiped promptly
• Test on delicate trims to confirm compatibility

How should professionals apply Eraser for best results?

Use Eraser as the final step before coating: spray a panel, wipe with a clean microfiber in a cross-pattern, then flip to a dry side for a final wipe. Work panel-by-panel to prevent recontamination. For larger jobs, use multiple towels and replace soiled cloths frequently.

• Apply panel-by-panel to avoid re-soiling cleaned surfaces
• Wipe with a clean microfiber towel in cross passes
• Finish with a dry side or fresh towel for inspection-ready paint
• Pair with a sprayer for consistent coverage and less product waste

Who is this for: Detailers, collision shops and coating applicators who need a reliable final-prep cleaner before ceramic coatings will benefit most from CARPRO Eraser. It’s aimed at professionals and experienced enthusiasts who require a silicone-free, anti-static wipe-down that reliably removes polishing oils and contamination. If you’re preparing paint for CQUARTZ or another long-lasting coating and want a cleaner surface with reduced dust pickup during application, Eraser is formulated to fill that role.