Ciuouient RV Toilet Waste Ball Kit 34117 for Thetford Aqua Magic-style — complete seal & drive-arm replacement

Ciuouient 34117 Waste Ball Kit is a complete replacement seal and drive-arm set designed to restore smooth operation and reliable sealing for Thetford Aqua Magic style RV toilets (models including 34120).

If your marine or RV toilet is leaking, sticking, or flushing sluggishly, swapping in a full waste ball kit is an economical way to refresh the valve assembly without replacing the entire toilet. This kit contains the waste ball, seals, flange gasket, drive arm and assorted fasteners so you can address wear points that commonly cause leaks, poor seals or rough actuation. The components are molded from durable materials intended for a long service life and engineered to match Thetford Aqua Magic-style parts.

What exactly is included in the 34117 replacement kit?

The kit bundles every part needed to rebuild the waste ball valve area—so you can replace worn seals and the drive arm in a single service. It’s intended to be a one-stop set for restoring proper sealing and movement.

• 1x molded waste ball (main valve)
• 1x waste ball seal (top sealing cup)
• 2x “U” cup seals for valve seating
• 1x closet flange seal for base sealing
• 1x waste ball drive arm to reconnect rocker action
• 2x screws and 4x plastic retaining rings for installation

How will this kit improve my toilet’s performance?

Replacing aged seals and the drive arm eliminates common causes of leaks and sticking. The refreshed components restore a tight seal under the waste ball and smoother mechanical linkage, improving flush consistency and reducing water loss.

• Stops leaks by replacing hardened or deformed seals
• Smoother drive arm action reduces sticking or uneven flushes
• Restored flange seal prevents seepage at the toilet base
• All parts matched to fit Aqua Magic–style assemblies for correct operation

Is installation difficult and what should I prepare?

Installation is straightforward for a basic DIYer with simple tools; it requires shutting off water and draining the toilet first. The kit’s parts are designed for direct swap-in replacement—remove the old seals and hardware, clean mating surfaces, and install the new components in sequence.

• Shut off and drain the toilet water before starting
• Remove old seals from under the base and over the waste ball
• Clean mating surfaces, then fit the flange seal and waste ball assembly
• Reconnect the drive arm and secure with supplied screws and rings

Which toilets and situations is this kit compatible with?

This replacement kit is compatible with Thetford Aqua Magic Style II, Style Lite and Style Plus models specified by part numbers 34117 and 34120. It’s intended for toilets showing seal failure, water leakage at the base, or mechanical problems in the waste ball valve.

• Designed for Thetford Aqua Magic-style toilets (confirm model numbers)
• Ideal when seals are cracked, flattened, or compressed
• Useful if the drive arm slips, sticks, or fails to actuate the waste ball
• Good preventative maintenance to renew old valve components

Who is this for: The Ciuouient 34117 Waste Ball Kit is for RV and marine owners, fleet maintainers, and DIY repairers who need a cost-effective way to repair the waste ball valve assembly on Thetford Aqua Magic–style toilets. If your toilet leaks at the base, won’t seal between uses, or the flush lever feels sticky or disconnected, this kit contains the parts to get the bowl sealing and operating smoothly again without replacing the entire toilet.