Colad inventing more Fine UV Putty 915011 — Fast‑curing single‑component spot repair, sandable, heat resistant

Colad Fast Curing System Fine UV Putty 915011 is a single-component, UV-curable finishing putty designed for quick, precise repair of small surface imperfections on metal and automotive plastics.

This fine-grain UV putty from Colad inventing more is formulated for smart- and spot-repair work where speed and control matter. Because it is a one-component product, there is no mixing or hardener required — the putty can be applied directly from the tube, leveled, and cured with Colad UV curing light for immediate further processing. It’s suited to thin, corrective layers and holds up to elevated temperatures once fully cured.

How do I apply Colad Fine UV Putty for small dents and scratches?

Application is straightforward: degrease and sand the area, then apply the putty with a palette knife or rubber spreader. Smooth thin layers for best cure-through and use Colad UV lighting at a recommended distance to finish each layer quickly.

• Surface prep: degrease, sand, and remove dust.
• Tools: apply with a palette knife or rubber spatula.
• Layering: apply thin coats; multiple coats can be added after curing.
• Curing: use Colad UV curing light; cure time varies with distance and thickness.

What materials and temperatures does this UV putty work with?

The putty bonds to common automotive substrates including steel, aluminum and many exterior plastics. Once fully cured, the material withstands higher temperatures encountered in vehicle repair processes without softening.

• Compatible substrates: metal, aluminum, automotive plastics.
• Heat resistance: stable up to approximately 130°C after complete cure.
• Finishability: sandable and ready for immediate subsequent processing.
• Adhesion: designed for exterior car components and spot-repair areas.

How fast does it cure and what affects cure time?

Cure speed depends primarily on the Colad UV curing light output, exposure distance and layer thickness. Thin applications cure fastest; thicker layers require longer exposure or multiple thin passes for reliable hardening throughout.

• Primary factors: UV lamp intensity, exposure distance, putty layer thickness.
• Best practice: cure thin layers for even, quick hardening.
• Immediate workflow: once cured, the surface is ready for sanding and next-stage processing.
• No hardener: one-component formulation removes mixing time and dosing errors.

Can I use this putty without special mixing or hardeners?

Yes — 915011 is a single-component UV putty that does not require a separate hardener. That makes dosing, storage and application easier in busy shops and mobile repair scenarios.

• No mixing: comes in a user-friendly tube for precise dosing.
• UV activation: curing completed with Colad UV light instead of chemical hardeners.
• Surface prep same as conventional putties: degrease, sand, clean.
• Layer control: apply thin, even layers for best results.

Who is this for: Colad Fast Curing System Fine UV Putty 915011 is aimed at collision repair technicians, mobile repair specialists and body shop professionals who need a fast, controlled solution for filling fine blemishes and performing spot repairs on exterior panels. It’s also useful for shops that want to cut wait times by using UV curing instead of traditional multi-component putties. If you require a single-component, easy-to-dose finishing putty that cures quickly under UV light and is compatible with metal and many plastics, this product supports efficient repair workflows without added hardener handling.