CRC Chain & Wire Rope Lubricant Aerosol — 10 wt oz, Extreme-Duty Synthetic with Moly, Water-Resistant High‑Temp Protection

CRC Chain & Wire Rope Lubricant is an extreme-duty synthetic aerosol that penetrates strands and bushings, then dries to a staying film that resists water, corrosion, and sling-off under heavy load.

Designed for the demands of light-duty chains and wire ropes, this 10 wt oz CRC aerosol combines synthetic lubricants, solvents and molybdenum to deliver deep penetration and lasting protection. It begins thin to work its way between wire strands and link bushings, then thickens into a dry, clingy film that helps keep moving parts operating smoothly under pressure and at elevated temperatures up to 350°F. NSF H2 registration allows use in some meat, poultry and beverage plant applications where incidental contact is possible.

How does this lube actually reach the inner strands of wire rope?

The formula starts with low-viscosity carriers that flow into gaps between strands and into pivot points. Once in place, the solvents evaporate and the synthetic base plus molybdenum build a dry, adhesive film that stays put instead of running off.

• Penetrating solvents for deep strand and bushing access
• Moly-enhanced film reduces wear on contact surfaces
• Dries to a tacky, non-slinging coating for lasting coverage

Will it stand up to heat, water, and heavy loads?

Yes. The lubricant is rated for working temperatures up to 350°F and resists washout and corrosion, so it keeps protection in place under both thermal stress and wet conditions. Its dry film reduces fling-off when chains and ropes run under load, preserving lubrication where it’s needed most.

• High working temperature tolerance (up to 350°F)
• Water-repellent formula to minimize rust
• Low sling tendency for heavy-usage applications

What equipment and environments is this best suited for?

CRC Chain & Wire Rope Lubricant is formulated for wire ropes and light-duty chains used in conveyors, hoists, garage doors, winches, pulleys and similar gear. It’s also effective on pins, rollers, bushings, seals, o-rings and come-alongs where a long-lasting, non-gumming film is desired.

• Low-speed conveyor and drive chains
• Hoists, winches, pulleys and garage door hardware
• Rollers, cushion pins, bushings, seals and o-rings

How do I apply it safely and get the best performance?

Shake the can well before use and apply a light, even coat to clean, dry surfaces so the penetrating carriers can reach internal gaps. Allow the solvent carriers to evaporate so the synthetic and molybdenum-rich film forms; reapply as needed based on operating conditions and wear.

• Shake can thoroughly before spraying
• Spray from a short distance for targeted penetration
• Wipe excess and allow drying time for best adhesion

Who is this for: CRC Chain & Wire Rope Lubricant is aimed at maintenance professionals, facility managers, equipment owners and DIYers who need dependable protection for wire ropes and lighter-duty chains. It’s a compact aerosol solution for plant floors, service trucks, marine rigging, garages and workshop settings where deep penetration, corrosion resistance and reduced sling-off matter. If you require a synthetic, moly-reinforced lubricant that’s NSF H2 registered and formulated to perform under heat and water exposure, this product is appropriate for routine lubrication and preventive maintenance tasks.