Custom Shop U-Pol Raptor Tintable Urethane Spray-On Truck Bed Liner Kit — 8-Quart, Textured Waterproof with Custom Coat Gun & Regu

The Custom Shop U-Pol Raptor 8-quart tintable urethane kit is a complete spray-on truck bed liner system bundled with a Custom Coat spray gun and regulator, designed to provide a durable, waterproof, textured protective coating.

This kit combines a tintable U-Pol Raptor urethane formula with a matched hardener and a Custom Coat bedliner spray gun that includes an adjustable nozzle, regulator and gauge, so you can tint, mix, shake and spray a professional-feeling protective coating at home or in a shop. The textured urethane cures into a flexible, abrasion- and stain-resistant surface that helps protect metal from corrosion, moisture and impact while also reducing noise and vibration.

How do I prepare and apply the U-Pol Raptor bed liner?

Preparation and correct mixing are key to a uniform result. Clean and de-grease the substrate, remove loose paint and rust, then mask off areas you don't want coated. Follow the kit's tint and hardener instructions, and use the included Custom Coat gun and regulator to control atomization for even coverage.

• Clean surface: remove contaminants, oil, and loose coatings.
• Mix: tint, add supplied hardener, stir thoroughly per directions.
• Gun setup: attach regulator, set pressure, and adjust the nozzle.
• Spraying: maintain consistent distance and overlapping passes.

What performance can I expect after the coating cures?

Once cured, the urethane forms a textured, waterproof layer that resists abrasion, stains and many environmental stressors. It remains flexible to accommodate substrate movement and helps dampen sound and vibration, while creating a barrier against salt, moisture and corrosion without sacrificing surface grip.

• Abrasion-resistant textured finish for cargo protection.
• Waterproof membrane that deters rust and corrosion.
• Flexible film that reduces cracking and chips under stress.
• Sound-deadening properties for quieter rides.

What features does the included Custom Coat spray gun and regulator provide?

The Custom Coat bedliner spray gun is built for textured urethane products and gives control over pattern and flow for consistent application. The regulator and gauge let you fine-tune air pressure for different viscosities and working conditions, and the adjustable nozzle helps create the desired texture from coarse to fine.

• Adjustable nozzle for texture control and pattern width.
• Regulator and gauge for precise pressure adjustments.
• Durable construction to withstand urethane abrasives and solvents.
• Designed for easy cleaning and maintenance between uses.

How should I care for and maintain the finished bedliner?

Maintenance is straightforward: clean spills promptly, avoid harsh solvents, and inspect periodically for deep cuts that might expose bare metal. Light washing with automotive soap and a soft brush will remove dirt and keep the texture looking uniform; damaged areas can be spot-repaired with compatible urethane products.

• Routine wash with mild detergent and rinse thoroughly.
• Avoid concentrated solvents and sharp scraping tools.
• Repair gouges promptly with a compatible touch-up kit.
• Re-coat high-wear zones as needed to maintain protection.

Who is this for? The Custom Shop U-Pol Raptor 8-quart kit with Custom Coat spray gun is aimed at vehicle owners, custom shops and DIY enthusiasts who want a professional-grade spray-on bedliner that can be tinted to match or complement paintwork. It's suitable for pickups, trailers, ATV beds and other metal surfaces where impact resistance, waterproofing and sound deadening are priorities, and for users who prefer the control of a gun-and-regulator setup over roll-on alternatives.