CYBERBEANS HEPA Carbon Air Filter Kit for Tesla Model Y (4-Pack) — OEM-fit, Activated Carbon & Nano-Silver

If you drive a Tesla Model Y and want a direct-fit cabin intake filter that balances particle capture with odor and VOC control, this CYBERBEANS four-pack replaces the front intake HEPA filters under the hood. Each filter is manufactured to 1:1 OEM size so installation is straightforward; the design layers aim to trap fine particulates while reducing smells from traffic and urban pollution. The kit includes tools and a video guide to make the swap a simple DIY task.

How does this filter improve the air inside my Model Y?

The CYBERBEANS filter uses a multi-layer construction that targets different contaminants: a PET pre-filter for larger debris, a melt-blown electrostatic HEPA layer for fine particles, and an activated carbon layer to adsorb odors and some VOCs. A nano-silver coating and folded PET support layer enhance durability and airflow efficiency without compromising filtration.

• Captures PM2.5 and particles down to 0.3 μm with electrostatic HEPA
• Activated carbon reduces smoke, exhaust odors, and common VOCs
• Nano-silver layer limits microbial build-up on the filter surface
• Precision folds maintain airflow and HVAC efficiency

Will these replace my Model Y’s original intake filters easily?

Yes—each CYBERBEANS filter is made to match Tesla’s original filter dimensions for Model Y (2020–2026), including Juniper series variants. The kit comes with the essential tools and a step-by-step video so most owners can complete the swap in about 15 minutes without professional help.

• 1:1 size match for direct fit under the hood
• Tool kit and visual guide included for DIY installation
• Estimated install time: ~15 minutes per filter
• Front intake position—no cabin disassembly required

How often should I replace these filters and what affects lifespan?

CYBERBEANS recommends replacing the intake HEPA carbon filters every 8–12 months or approximately every 12,000 miles, depending on driving patterns and local air quality. Heavy urban driving, frequent exposure to smoke, or dusty environments will shorten effective life; rural, low-traffic use can extend it toward the upper interval.

• Typical guidance: replace every 8–12 months or ~12,000 miles
• Replace sooner in high-pollution or smoky conditions
• Visual/odor cues—visible dirt or persistent smells—also indicate replacement
• Maintaining timely swaps preserves HVAC performance and airflow

What materials and technologies are inside each filter?

Each CYBERBEANS cartridge is built with five layers: a PET pre-filter, a HEPA melt-blown layer for small particles, activated carbon for adsorption of odors and VOCs, a nano-silver coating to inhibit microbial growth, and a folded PET support layer to retain structure and reduce resistance. This blend aims to protect the cabin air while maintaining efficient airflow through the HVAC intake.

• PET pre-filter traps hair, dust, and larger debris
• Electrostatic HEPA layer captures fine particulates (PM2.5)
• Activated carbon adsorbs odors, exhaust fumes, and some VOCs
• Nano-silver and folded PET support extend filter life and airflow

Who is this for: The CYBERBEANS HEPA Carbon Air Filter Kit is aimed at Tesla Model Y owners (2020–2026) who prefer a straightforward, OEM-sized replacement that combines particulate filtration with odor control. It suits commuters in urban environments, drivers exposed to smoke or heavy traffic, and anyone who likes the convenience of a four-pack for scheduled maintenance. If you want a durable, easy-to-install intake filter that prioritizes both particle removal and odor reduction, this kit provides a practical, cost-effective option.