CZC AUTO 12V LED Magnetic Towing Light Kit — 55 lb Magnets, 20 ft Harness, DOT-Compliant

CZC AUTO 12V LED Magnetic Towing Light Kit is a DOT-compliant, magnetic trailer light set with a 55-pound hold, 100,000-hour LEDs, and a 20-foot wiring harness for reliable temporary towing illumination.

This compact towing light kit combines strong magnetic mounts with bright LED signal, brake, and tail lighting so you can safely tow a boat, trailer, RV, or vehicle on short trips without permanently wiring your trailer. The set includes two magnetic lights connected by a 7-foot lead and a 20-foot main harness terminating in a standard 4-pin trailer connector, giving you flexible placement and ample reach to connect to most tow vehicles.

How secure are the magnetic mounts when driving?

The CZC AUTO kit uses 55-pound rated magnetic bases with a scratch-resistant finish to hold the lamps firmly to metal trailer surfaces. While intended for temporary lighting during low-speed transport, the strong magnetic force minimizes lift or shifting on standard towing runs when installed on clean, flat metal.

• Magnetic strength: 55 pounds per base for firm adhesion
• Scratch-resistant base protects vehicle finish during mounting
• Best on clean, flat metal surfaces—avoid excessive high-speed or rough off-road towing

What wiring and connector options does this kit include?

The kit arrives with a 20-foot main wire harness and a 7-foot lead between the two lights, ending in a standard 4-pin trailer plug for universal compatibility. The length gives you room to route the cable along most tow vehicles and trailers without splicing, and the 4-pin connector works with common wiring setups for tail, turn, and brake circuits.

• 20 ft main harness to reach most tow vehicle connections
• 7 ft distance between lights for flexible placement
• Standard 4-pin connector fits common trailer wiring sockets

How bright and durable are the LEDs?

These lamps use high-efficiency LEDs that meet DOT visibility standards and are rated for long life—about 100,000 hours—so they maintain brightness over many uses. The sealed lamp housing resists moisture and road debris, and the LED design uses less current than incandescent bulbs, reducing strain on the tow vehicle electrical system.

• DOT-compliant LED light output for tail, brake, and turn signals
• Approximately 100,000 hours of LED life—long-lasting performance
• Sealed housings for water and debris resistance during towing

What size towing setups is this intended for?

The CZC AUTO magnetic kit is designed for temporary towing applications up to about 80 inches wide, such as small trailers, boats, dollies, and some RV and truck loads. It’s ideal when you need quick, removable lighting that won’t require permanent wiring on the towed vehicle.

• Recommended for towing widths up to 80 inches
• Great for trailers, boats, dollies, small RVs, and utility loads
• Intended as temporary auxiliary lighting, not a permanent replacement

Who is this for: The CZC AUTO 12V Magnetic Towing Light Kit is aimed at boat owners, weekend haulers, auto shops, and anyone who occasionally transports vehicles or gear and needs a fast, removable lighting solution. If you want DOT-visible LED signals, long wiring reach, and magnetic mounts that protect finish while holding firmly, this kit is designed for quick installs and short to moderate towing trips.