DEEPDREAM Trailer Bearing Kit 3500 lb, 2-Set (L68149/L44649) for #84 Spindles — Chrome-Steel Bearings & Seals

DEEPDREAM 2-set 3500lb trailer bearing kit supplies two full axle rebuild kits—bearings, races, seals, nuts, washers, cotter pins, dust caps and rubber plugs—to fit common 1-3/8" and 1-1/16" spindles.

This all-inclusive package is designed for 3500 lb trailers that use spindle #84 and the L68149/L68111 and L44649/L44610 bearing combinations. Each kit contains precision chrome-steel bearings, matched races, 171255TB grease seals, spindle hardware and protective dust caps so you can service two hubs in one go. The components are engineered to lower friction, stabilize the wheel assembly and help keep lubricant where it belongs.

How do I know these bearings fit my trailer?

Measure your existing bearings and spindle dimensions or cross-check your trailer handbook for spindle #84 compatibility. This DEEPDREAM kit includes both 1-3/8" (L68149/L68111) and 1-1/16" (L44649/L44610) bearing sets, covering the most common sizes for 3500 lb axles.

• Includes L68149 bearings and L68111 races (1-3/8") and L44649 bearings with L44610 races (1-1/16").
• Fits trailers rated to 3500 lb and spindles listed as #84.
• Compare inner/outer bearing diameters before installation to confirm fit.

What hardware and seals are included with the two-set kit?

Each of the two complete sets contains the full range of hub service parts so you won’t need to hunt for extras. The bundle supplies grease seals, spindle nuts, washers, cotter pins, dust caps and rubber plugs along with the bearings and races.

• 2x 171255TB grease seals (1.72" ID, 2.56" OD) to help retain lubricant.
• 2x spindle nuts (1"), 2x shaft washers (1"), and 2x cotter pins (2.4").
• 2x dust caps (1.98") and 2x rubber plugs (1.18") for protection from dirt and water.

What materials and performance can I expect from these bearings?

DEEPDREAM bearings are forged from chrome steel for long-term wear resistance and stable rolling performance under trailer loads. The included double-lip grease seals reduce lubricant loss and keep contaminants out, which supports smoother rotation and quieter operation when installed properly.

• Chrome-steel bearings tested for durability and reduced noise.
• Double-lip seals for improved leakage prevention.
• Precision-matched races that minimize play and promote even wear.

How should I use this kit when servicing my trailer hubs?

This kit is intended for routine hub rebuilds and preventive maintenance. Remove the old bearings and races, inspect the spindle and hub, press in new races, pack bearings with grease, install seals and torque the spindle nut to the manufacturer’s spec. Finish by securing with the cotter pin and fitting the dust cap and rubber plug.

• Follow torque and end-play specs from your trailer manufacturer.
• Use high-quality wheel bearing grease and proper race installation tools.
• Replace both sides of an axle at once to maintain balanced performance.

Who is this for? This DEEPDREAM two-set 3500 lb bearing kit is aimed at trailer owners, marine and boat trailer operators, DIY mechanics and professional maintenance shops that need a comprehensive, value-packed rebuild solution. It’s especially useful for those servicing spindle #84 axles or replacing both bearings on a tandem setup—offering matched components to restore hub function and protect your trailer wheels from premature wear.