DeVilbiss StartingLine HVLP Auto Painting & Priming Kit — 2-Gun (1.3/1.8 mm), 600cc Cups, Carry Case

The DeVilbiss StartingLine HVLP Complete Auto Painting and Priming Kit is a two-gun spray system designed for DIYers and hobbyists to apply basecoat, clearcoat and primer with professional-style atomization and a portable carrying case.

This compact kit pairs two full-size StartingLine gravity-feed HVLP spray guns — one optimized for finish coats and the other for priming — plus essential accessories so you can move from surface preparation to final topcoat without hunting for parts. Built to perform on small repairs, automotive panels and refinishing projects, the kit balances spray quality with user-friendly setup and maintenance tools.

Which coatings can I spray with the included finish gun?

The finish gun comes fitted with a 1.3 mm fluid tip, ideal for low-viscosity coatings where fine atomization matters. Use it for basecoats, clearcoats and other light automotive finishes to achieve consistent coverage and smooth appearance.

• 1.3 mm fluid tip for base and clear coats
• 600 cc (20 oz) gravity metal cup for continuous spraying
• Operates at 30 PSI inlet delivering approximately 10 PSI cap pressure
• Requires ~13 CFM air volume for proper spray performance

What is the priming setup and when should I use it?

The kit includes a second full-size StartingLine gun with a 1.8 mm fluid tip configured for primers, sealers and heavier body coatings. Choose this gun when applying primers, thinned latex or oil-based primers, or any medium-to-high viscosity materials that need larger fluid passages for reliable flow.

• 1.8 mm tip for primers, sealers and heavier coatings
• 600 cc metal cup for larger priming jobs without frequent refills
• Same air requirements: 30 PSI inlet and roughly 10 PSI cap pressure
• Good for both spot repairs and full-panel priming tasks

How does this kit help me set up, maintain and transport the guns?

The kit includes practical accessories that simplify setup, maintenance and storage so you can focus on painting rather than sourcing tools. A regulator with gauge lets you dial in consistent inlet pressure while cleaning and maintenance tools help extend gun life.

• Air regulator with gauge for consistent spray pressure
• Gun cleaning brush set and maintenance wrench for routine servicing
• Blow-molded carrying case organizes tools and protects guns during transport
• Replacement rebuild kits available to refresh wear parts over time

What spray performance and shop requirements should I expect?

Both guns are designed to reach good atomization at typical hobbyist compressor settings but they do have minimum air-volume needs. Make sure your compressor can deliver roughly 13 CFM at the recommended inlet pressure to maintain consistent spray patterns, especially on larger panels.

• 30 PSI inlet pressure recommended for both guns
• Approximately 10 PSI air cap pressure during operation
• ~13 CFM air volume required for stable performance
• Made in TW (Taiwan) with a 1-year limited warranty

Who this kit is for: This DeVilbiss StartingLine two-gun kit suits do-it-yourselfers, automotive enthusiasts and small-shop technicians looking for a cost-effective, portable solution to prime and finish panels. If you need a setup that covers both light-bodied finish coatings and heavier primers without buying separate guns and accessories, this kit provides a practical, ready-to-use package with rebuild options for long-term service.