DEXTER AXLE DB-35 Disc Brake Pad Set (4) — High-Temp Organic, Fits UFP/Dexter Calipers

High-temperature organic brake pads engineered for Dexter/UFP DB-35 calipers — a four-pad set that services one axle with reliable stopping power and long wear life.

These DEXTER AXLE replacement pads (part #091-007-00, UFP DB-35) are molded organic friction components made to fit a range of UFP/Dexter DB-35 series calipers. They replace worn pads on one axle and are compatible with multiple caliper part numbers, delivering consistent braking feel without the added noise or corrosion concerns of some metallic compounds.

Will these pads fit my Dexter or UFP caliper?

Yes — these pads are designed specifically for DB-35 style calipers and are compatible with several Dexter and UFP caliper model numbers. Check the caliper part number stamped on your hardware to ensure a match before ordering.

• Fits Dexter/UFP 089-135-00, 089-136-00, 089-236-00, 089-013-00, and 089-012-00 series calipers
• UFP part designation: DB-35
• Dexter part number: 091-007-00
• Sold as a set of 4 pads — enough to service one axle

How durable and heat-resistant are these organic pads?

These pads use an organic friction formulation designed to resist deterioration at elevated temperatures while keeping material loss low during heavy use. Compared with older NAO or semi-metallic options, they are formulated to maintain integrity longer under repeated braking cycles.

• Organic compound tuned for high-temperature stability
• Lower wear rate under normal towing and hauling conditions
• Reduced corrosion and less surface noise than many metallic pads

Do I need an inner pad clip or special orientation during installation?

No special clip is required for proper braking function with this pad set; earlier pad designs included an inner pad clip but DB-35 systems operate correctly without it. Inner and outer pads are interchangeable, simplifying replacement and reducing the chance of installation errors.

• Inner and outer pads are interchangeable for easier service
• No clip required — fits and functions as intended without it
• Sold as a matched four-pad set for consistent friction across the axle

What should I expect during and after installation?

Installation follows standard disc brake pad replacement steps for DB-35 calipers: retract the caliper piston, remove the old pads and hardware, install the new pads, and torque hardware to spec. After installation, bedding in the pads with a few controlled stops helps seat the friction material for even performance.

• Requires basic brake tools and caliper piston retraction
• Use matched hardware and replace worn shims or pins as needed
• Perform a bedding procedure for best initial performance

Who is this for? This four-pad DEXTER AXLE DB-35 replacement set is aimed at trailer owners, fleet managers, and DIY mechanics who service Dexter or UFP DB-35 calipers. If you need a dependable, long-wearing organic pad set that fits several DB-35 caliper variants and simplifies installation with interchangeable inner/outer pads, this kit provides a direct, OEM-compatible replacement backed by known part numbers.