Dicor EPDM RV Roof Acrylic Coating — White 1 Gal, Reflective Waterproof Topcoat

This acrylic roof coating forms a reflective, waterproof barrier tailored for EPDM rubber membranes on recreational vehicle roofs. It improves UV resistance and weatherability while offering an efficient coverage rate and quick drying times. Applied as the finishing coat in a two‑coat system, it adheres properly only after the surface is prepared with Dicor Rubber Roof Cleaner/Activator to ensure a durable bond.

How does this coating extend an RV roof's life?

The coating adds a flexible, waterproof layer that shields the existing EPDM membrane from sun, rain, and temperature swings. By reflecting sunlight and resisting weathering, it reduces material degradation and delays the need for a full roof replacement.

• Creates a continuous waterproof skin over EPDM and compatible PVC
• Reflective white finish reduces UV exposure to the membrane
• Flexible film accommodates roof movement without cracking
• Requires proper surface prep for lasting adhesion

What surface preparation and application steps are required?

Surface prep is essential: clean and activate the rubber membrane using Dicor Rubber Roof Cleaner/Activator to remove contaminants and promote adhesion. Apply two coats of the acrylic coating, allowing recommended dry time between coats for optimal performance.

• Use Dicor Rubber Roof Cleaner/Activator before coating
• Apply two coats — do not substitute the number of coats
• Coverage: roughly 125 sq ft per gallon per coat
• Follow drying times and temperature guidelines for best results

Is this product compatible with all RV roofs and how is coverage calculated?

This acrylic topcoat is formulated specifically for EPDM and compatible PVC roofing membranes; it is not intended for metal or fiberglass roof substrates. Coverage is approximately 125 square feet per gallon for each coat, so plan material needs based on two coats and roof complexity.

• Compatible with EPDM and some PVC membranes only
• Estimate two coats at ~125 sq ft per gallon per coat
• Extra material recommended for seams, penetrations, and textured surfaces
• One‑gallon size suits small roofs or patch areas; larger projects require multiple gallons

What practical benefits will I notice after applying the coating?

After proper application, you should see improved water shedding, a brighter roof surface that reflects heat, and a smoother appearance that seals minor imperfections. The system is designed to be labor‑efficient, reducing time compared with some alternative roof restoration methods.

• Improved waterproofing and seam protection
• Cooler roof surface through reflective white finish
• Saves over 25% in labor versus comparable systems
• Quick drying helps speed project completion

Who is this for: DIY RV owners, professional roof restorers, and fleet technicians who maintain EPDM or compatible PVC recreational vehicle roofs and want a cost‑effective, reflective acrylic topcoat. Choose this 1‑gallon unit for touch‑ups, small roof restorations, or to complete a two‑coat system after proper surface activation; for full large‑roof projects, calculate total gallons based on two coats at ~125 sq ft per gallon per coat.