DNA MOTORING 2 Ton Low-Profile Hydraulic Floor Jack & Ratchet Stands Kit Blue — 13" lift, 11–17" adjustable support

DNA Motoring's 2-ton car jack and stands kit is a complete blue hydraulic lifting and support set designed to lift most passenger cars safely and hold them with adjustable ratchet stands.

This combo pairs a low-profile hydraulic floor jack with two ratchet-style jack stands, giving you the ability to raise a vehicle up to 13" and secure it between 11" and 17" of support. Built from welded heavy-gauge steel and finished in eye-catching blue, the kit is intended for cars and light-duty vehicles with a maximum load of 2 tons (4,000 lbs). It includes built-in protection features and a broad base on the stands to improve stability during maintenance tasks.

How high and heavy can this kit safely handle?

The hydraulic floor jack lifts from a minimum of about 5.1" to a maximum height of roughly 13", and its rated capacity is 2 tons (4,000 lbs). The matching ratchet stands adjust from approximately 11" to 17" and are each rated to support the same 2-ton limit.

• Floor jack capacity: 2 tons / 4,000 lbs.
• Lifting range: ~5.1" minimum to ~13" maximum.
• Stand adjustment: ~11" to ~17" per stand.
• Best for sedans, coupes, hatchbacks, and many small crossovers; not recommended for full-size trucks or large SUVs.

What safety features prevent overloading or slipping?

The jack includes an overload protection valve that helps avoid lifting beyond its rated weight, while the saddle offers a broad contact area to reduce slipping on pinch welds or frame points. The ratchet stands use a sawtooth ratchet bar and locking lever to secure the chosen height, and each stand has a wide pyramid-style base for added steadiness.

• Integrated overload protection valve on the jack.
• Large saddle for stable vehicle contact.
• Sawtooth ratchet bar plus locking lever on stands.
• Wide base design to minimize tipping risk.

How easy is the kit to position and operate in a home garage?

The floor jack uses large fixed and swivel steel casters to roll smoothly beneath vehicles and to turn into position with minimal effort. Its low-profile design helps reach low-clearance points, and the quick-ratcheting action on the stands lets you set support height without repeated adjustments.

• Low-profile jack fits under lowered vehicles.
• Large steel casters and swivel wheels for mobility.
• Quick ratchet adjustments on stands for fast setup.
• Durable welded-steel frame for repeated garage use.

What are the correct and incorrect uses of this jack and stand set?

The hydraulic jack is intended solely for lifting vehicles vertically; it must not be used as a permanent support. Once the vehicle is lifted, always place jack stands under appropriate support points before working under the car. Avoid side loads, downward pressure, and using the jack or stands beyond their rated capacity.

• Correct: lift vehicle, then support on stands for repairs.
• Incorrect: using the jack as a long-term support device.
• Incorrect: applying lateral force or using beyond 2-ton rating.
• Correct: pair with wheel chocks and flat ground for safety.

Who is this for? The DNA Motoring 2 Ton Car Jack and Stands Kit is designed for home mechanics and DIY car owners who work on compact and mid-size passenger vehicles. If you routinely perform brake jobs, tire changes, suspension checks, or other under-car maintenance on sedans, coupes, or smaller crossovers, this kit provides a portable, cost-effective lifting and support solution. It is not intended for heavy-duty trucks, large SUVs, or commercial vehicles that exceed the stated 2-ton capacity.