DriveUpTools Jack Stands 3 Ton Pair — Adjustable 11.03–16.7in, Double-Locking Steel with EPDM Saddle Pads

DriveUpTools Jack Stands are a pair of heavy-duty, double-locking steel supports rated 3 tons each, designed to safely hold cars, SUVs, trucks and vans between 11.03 and 16.7 inches of height.

These two green powder-coated jack stands offer a durable workshop solution for routine maintenance, tire changes and light repairs. Each stand combines a self-locking ratchet and a removable safety pin for redundant security, while the EPDM rubber saddle pads protect vehicle pinch welds and crossmembers. The low minimum height reaches tighter jacking points, and the 16.7-inch maximum provides comfortable clearance for under-vehicle work.

How do these jack stands keep my vehicle secure?

The DriveUpTools stands use a double-locking design so the load is held even if one mechanism fails. A self-locking ratchet catches the pawl automatically as the stand rises, and a steel safety pin physically locks the riser in place.

• Double locking: ratchet plus removable steel safety pin for redundancy
• Solid steel construction rated 3 tons (6,600 lb) per stand
• Wide base for stability on flat surfaces
• EPDM rubber saddle pads to prevent metal-on-metal contact

Will these fit under my car, SUV or light truck?

The adjustable height range from 11.03 to 16.7 inches covers most common jacking points on cars, SUVs and light trucks. The 11.03-inch minimum is low enough for many low-clearance vehicles, while the extended height gives room to work safely under larger vehicles.

• Minimum height: 11.03 inches for low-clearance access
• Maximum height: 16.7 inches for added working space
• Set of two stands suitable for supporting one end of a vehicle during maintenance
• Cross-compatible with common jack points and lift procedures

What features make these stands durable and workshop-ready?

DriveUpTools jack stands are made from heavy-gauge steel with a bright green powder coat to resist rust and improve visibility in the shop. The robust saddle and riser mechanisms are engineered for repeated use and straightforward maintenance.

• Powder-coated finish for corrosion resistance and easy spotting in low light
• Heavy-gauge steel frames designed for repeated load cycles
• EPDM saddle pads for vehicle protection and improved grip
• Simple, serviceable pins and ratchets for long-term reliability

How should I use these stands safely?

Always use jack stands on a level, solid surface and never rely only on a hydraulic jack when working under a vehicle. Position the stands under manufacturer-recommended support points, engage the ratchet, then insert the safety pin to secure the riser before letting the vehicle rest on the stands.

• Park on level ground and chock the wheels before lifting
• Raise the vehicle with a proper jack, then set stands under approved support points
• Engage ratchet, insert safety pin, and lower vehicle slowly onto stands
• Use stands in matched pairs and follow vehicle maker instructions

Who is this for: These jack stands are built for DIY mechanics, mobile technicians and home workshop owners who need reliable, visible, heavy-duty support for cars, SUVs, vans and light trucks. They suit users who value redundant safety features, corrosion resistance and an adjustable height range that accommodates both low-clearance vehicles and taller lifts. A 12-month warranty provides added peace of mind for routine garage and roadside maintenance tasks.