dynofit 2" Leveling Lift Kit for Dodge Ram 4WD — Front Coil Spring Spacers, 2-Inch Lift, Set of 2

Dynofit 2" Leveling Lift Kit raises the front of compatible Dodge Ram 4WD trucks two inches to even out stance and reduce bumper rake.

If your 4x4 Ram sits nose-down or you want extra clearance for larger tires, this pair of coil spring spacers installs above the front springs to lift and level the truck. The kit is engineered for 4WD models across many Ram years and includes the stamped spacers, mounting hardware and clear instructions so you can complete the job in a couple of hours with basic tools and a spring compressor.

Will this kit fit my Dodge Ram model and year?

The Dynofit 2" spacers are built for front suspension on 4WD Ram trucks. They cover a wide range of model years, but fit depends on your exact model and factory suspension setup. Always cross-check with your vehicle's year and 4WD designation before ordering.

• Compatible: 1994–2001 Ram 1500 (4WD), 2003–2008 Ram 1500 Mega Cab (4WD)
• Also fits: 1994–2013 Ram 2500 and 1994–2012 Ram 3500 (4WD)
• Not for 2WD models—designed specifically for 4x4 front coil spring assemblies

How difficult is installation and what tools are required?

Installation is straightforward for someone with basic mechanical skills. The job typically takes around two hours per side with a spring compressor; professional alignment is recommended after installation to ensure proper tracking and tire wear.

• Tools: spring compressor, jack stands, socket set, torque wrench
• Time: roughly 1–2 hours per side for experienced DIYers
• Tip: follow included instructions and tighten hardware to specified torques

What are the construction and durability features of these spacers?

Dynofit designed the spacers with a textured matte-black finish and reinforced square bolt holes to resist wear and maintain alignment. The welds are solid and fabrication emphasizes long-term durability in off-road and street use.

• Finish: textured matt black resists chips and surface wear
• Design: square bolt holes for secure seating and reduced slippage
• Construction: robust welds and stamped steel for structural strength

What practical benefits will I notice after installing this kit?

Raising the front by two inches levels truck stance, improves appearance, and creates extra clearance to reduce tire rubbing with larger wheels. The result can be a more aggressive look and more predictable off-road clearance without altering rear ride height.

• Levels front-to-rear stance by approximately 2 inches
• Helps eliminate light fender-to-tire rubbing with larger tires
• Maintains factory spring geometry while adding clearance

Who this is for: The Dynofit 2" Leveling Lift Kit is intended for owners of 4WD Dodge Ram 1500/2500/3500 trucks (specified years) who want a straightforward, cost-effective way to lift the front end two inches. It suits DIY mechanics and professional installers who prefer stamped-steel spacers with durable finishes and clear instructions; not intended for 2WD trucks or for drivers expecting changes to rear ride height or heavy-load suspension upgrades.