Erickson Wheel Chock Tie-Down Kit, Double-Slotted E-Fitting, 2 in x 7.5 ft Straps, 4 Powder-Coated Chocks

Erickson Wheel Chock Tie-Down Kit is a complete mounting solution that secures off-road vehicles with four powder-coated wheel chocks and two 2" x 7.5' ratchet straps featuring double-slotted E-track fittings.

This kit is designed for people who regularly haul ATVs, lawn tractors, mowers or other small off-road vehicles and need a repeatable, low-profile way to lock wheels in place on a trailer or truck bed. The four permanently mountable chock brackets position behind each rear wheel to stop forward and rear movement, while two heavy webbed ratchet straps provide lateral restraint over the tires. Rated for a combined working load limit suitable for vehicles up to 1,500 lb (680 kg), the system balances durability with easy operation.

How do the wheel chocks install and stay out of the way when not in use?

The chock brackets bolt to your trailer deck or pickup bed so they remain fixed in position and do not shift during transport. When not restraining a wheel you can drive over them or keep them flush with the deck depending on placement. Their powder-coated finish guards against corrosion for outdoor use.

• Four powder-coated chock brackets for permanent mounting
• Drive-over design makes loading/unloading quick and repeatable
• Low-profile when installed to minimize interference with cargo
• Mounting hardware sold separately so you can choose hardware for your surface

What tires and vehicle weights does this kit accommodate?

The tie-down straps and chocks are sized to work with a wide range of small vehicle tires and light off-road machines. Straps fit tires from approximately 10" to 30" in diameter and the kit’s rated capacity supports vehicles up to 1,500 lb per kit when used as directed.

• Strap width: 2" webbing with 7.5' length each
• Tire compatibility: fits roughly 10"–30" diameter tires
• Working Load Limit: designed for securely transporting vehicles up to 1,500 lb
• Break strength: straps built to a 4,500 lb tensile rating

How do the double-slotted E-fitting ratchet straps work with different tire sizes?

The double-slotted E-fitting gives two contact positions so each strap can seat properly on either small or larger tires, helping maintain a secure over-the-wheel hold. That flexibility means the same straps can be used on a variety of machines without swapping hardware.

• Double-slotted E-fitting adapts to small and large tire profiles
• Ratchet mechanism tightens quickly and holds tension during transit
• Strong webbing resists abrasion from tire contact
• Simple hook-up reduces loading time at the ramp

What should I know before mounting these chocks on my trailer or truck?

Plan bracket placement behind the vehicle’s rear wheels so the tire seats into the chock when parked. Because mounting hardware isn't included, pick bolts or screws rated for your deck material and thickness. Verify your trailer or truck's weight limits and secure a second tie-down method for added redundancy if hauling heavier loads.

• Mounting bolts/screws not included — choose hardware for your deck material
• Place brackets behind rear wheels for correct engagement during loading
• Check vehicle and trailer weight limits before transport
• Consider an additional tie-down for heavy or high-center-of-gravity loads

Who is this for: The Erickson Wheel Chock Tie-Down Kit is ideal for weekend riders, landscapers, and small-farm owners who want a dependable, permanently mounted wheel-restraint system for trailers or truck beds. If you regularly move ATVs, lawn tractors, UTVs, or similar light vehicles and need faster, repeatable loading with robust straps and rust-resistant chocks, this kit provides a practical, long-lasting solution.