Eunice 3/4" Fuel Line Hose 10 ft (19mm) — NBR Oil-Resistant, Push-Lock Ready

Eunice 3/4" (19mm) ID fuel line hose is a 10-foot NBR rubber hose built for automotive fuel delivery and small-engine use, rated for everyday pressure and temperature ranges.

This heavy-duty push-lock fuel hose combines oil-resistant NBR rubber with a practical 3/4" (19mm) inner diameter and 10-foot length to service cars, trucks, buses, generators and other equipment. Designed for conveying gasoline, diesel, biodiesel blends, engine oil or water, the hose offers a reliable working pressure and a wide temperature window for varied climates. It installs with common hose barbs and clamps and is sized to match typical push-lock and barb fittings used across automotive and light industrial applications.

What pressures and temperatures can this Eunice fuel hose handle?

The hose is rated with a working pressure of 0.6 MPa (approximately 87 psi) and a burst pressure of 1.8 MPa (approximately 261 psi). Its NBR rubber construction keeps performance consistent across a broad range, so it stays flexible in cold weather and resilient under heat within its rated limits.

• Working pressure: 0.6 MPa (~87 psi)
• Burst pressure: 1.8 MPa (~261 psi)
• Temperature range: -40°F to 248°F (-40°C to 120°C)
• Material: oil-resistant NBR rubber for durability

Which fluids and vehicles are appropriate for this hose?

This hose is engineered to convey gasoline, diesel, biodiesel fuel blends, engine oil and water, making it suitable for many automotive and small engine fuel systems. Always verify the pressure and chemical compatibility for your specific fuel type and vehicle before installation.

• Compatible fluids: gasoline, diesel, biodiesel blends, engine oil, water
• Common uses: cars, trucks, buses, generators, small engines
• Not recommended for aggressive solvents or unknown chemicals
• Check system pressure and regulatory requirements before use

How do I install and secure the Eunice push-lock fuel hose?

Installation is straightforward: slide the hose over a properly sized hose barb or push-lock fitting, then secure with a fuel-grade clamp to create a leak-resistant connection. Use clamps rated for fuel applications and inspect fittings for wear before reuse.

• Use hose barbs or compatible push-lock fittings
• Secure with fuel-grade hose clamps for a reliable seal
• Trim hose squarely to avoid leaks and ensure proper fit
• Inspect connections periodically for wear or softening

What are the hose dimensions and key physical details?

The hose has a 3/4" (19mm) inner diameter and approximately 1.06" (27mm) outer diameter, supplied as a 10-foot continuous length. Its NBR rubber composition resists oil and typical automotive fluids, while the wall thickness supports the published pressure ratings for everyday automotive needs.

• Inner diameter: 3/4" (19 mm)
• Outer diameter: ~1.06" (27 mm)
• Length: 10 ft (single continuous piece)
• Construction: NBR rubber, oil-resistant

Who is this for: The Eunice 3/4" ID fuel line hose is aimed at automotive technicians, home mechanics, fleet maintenance teams and DIYers who need a dependable, oil-resistant hose for fuel, oil or water lines in cars, trucks, buses, generators and small engines. It's a practical replacement or upgrade when you require a specific 3/4" inner diameter hose with a 10-foot length and dependable temperature and pressure performance. Always confirm system pressures and fluid compatibility before installation.