Euplokeer 20in Gas Strut Pair 15 lb (67N) — 2-Pack with Mounting Brackets for RV Doors & Boat Hatches

These two Euplokeer 20-inch gas struts (15 lb / 67 N each) with mounting brackets are a ready-to-install replacement set for RV entry doors, bed storage lids, boat hatches, camper shells and other lift-up panels.

If your camper door, trailer lid, or boat hatch sags, slams shut, or feels hard to lift, swapping in a matched pair of gas springs restores smooth, controlled operation. This kit includes two 20" struts rated at 15 pounds (67 N) each, two L-style brackets, two flat-bottom brackets, and 16 screws so you can mount the shocks in the same locations as many common OEM parts (interchanges listed). The cylinders arrive precharged and ready to fasten with common tools — a flat-head screwdriver is sufficient for bracket clips.

How do I confirm these gas struts will fit my application?

Match three things: the extended length, the force rating, and the OEM interchange or part number stamped on your old strut. Compare your original's measurements and part number to this set’s 20.00" extended length and 15 lb (67 N) force. When these align, the Euplokeer struts should work as a straight swap.

• Measure extended length of existing strut end-to-end.
• Check pound-force on the old cylinder or note door weight.
• Verify interchange numbers such as 125719, 25719, SX200P15, or similar.
• Use supplied 10mm ball-stud brackets when your mount requires them.

What comes in the box and what tools do I need to install it?

The package contains two gas springs, two L-brackets, two flat-bottom brackets and 16 mounting screws — everything for a typical double-sided replacement. Installation is straightforward for most DIYers: unclip the old strut, mount the brackets, and snap the new shocks onto the ball studs. A flat-head screwdriver and basic hand tools are usually enough.

• 2 gas struts, 20.00" extended length, 15 lb / 67 N each.
• 2 L-shaped mounting brackets and 2 flat-bottomed brackets included.
• 16 screws for secure bracket attachment.
• Recommended tools: flat-head screwdriver, wrench or socket set for ball studs.

Which panels and vehicles are these gas shocks suitable for?

These struts were designed for RV and marine use but work anywhere a 20" 15 lb force lift is needed. Common installations include RV entry doors, under-bed storage lids, truck topper shells, boat hatches, and food truck windows. They function as replacements for many industrial and OEM part numbers listed in the compatibility notes.

• RV entry doors, compartment lids, and bed storage lifts.
• Boat hatches and small marine access panels.
• Trailer doors, camper shells, and food truck windows.
• Interchangeable with numbers like 125719, 25719, SX200P15, and related OEM codes.

Who this is for: this pair of Euplokeer gas springs is intended for owners and DIY maintainers of RVs, campers, trailers, and small boats who need a cost-effective, plug-and-play replacement for worn or mismatched lift supports. It's also suited to fabricators and hobbyists building custom lids or access panels who require a dependable 20" lift solution with included mounting hardware. Euplokeer supports the product with 24-hour email service and a 15-month exchange policy if you need help after purchase.