Evercoat Body Shop 105013 Metal Reinforced Filler for

Evercoat Body Shop Metal Reinforced Filler is a two-part, metal-reinforced repair compound that restores rusted areas, fills holes, and bonds to aluminum, galvanized steel and steel for long-lasting, corrosion-resistant repairs.

If you need a durable, easy-to-shape filler for automotive bodywork or metal patching, this 13 fl oz kit includes the liquid hardener and a metal-reinforced compound engineered to adhere strongly to metal substrates and resist moisture, impact and corrosion. It sands to a smooth finish, accepts primers and basecoat/clearcoat systems without staining, and can be drilled or tapped after cure for added versatility.

How does this filler perform on aluminum and galvanized steel?

The formula contains metal reinforcement and adhesion promoters tailored to difficult-to-bond metals. It creates a mechanical and chemical bond that reduces the risk of delamination on non-ferrous and coated steel surfaces.

• Specifically formulated for aluminum, galvanized steel and conventional steel.
• Metal reinforcement increases structural strength at the repair site.
• Maintains adhesion where simple polyester fillers typically fail.

What steps are needed to prepare and apply the product?

Surface prep is straightforward: remove loose rust, degrease, and roughen the area for mechanical grip. Mix the supplied liquid hardener with the filler to the recommended ratio, apply, shape, and allow full cure before sanding or finishing.

• Strip paint and flaky rust; clean with an appropriate solvent.
• Mix filler and hardener until uniform; work time depends on temperature.
• Apply with a spreader, contour to shape, then sand to desired smoothness.

How durable is the repair against moisture, impact and refinishing?

Once cured, the reinforced filler resists moisture intrusion and delivers improved impact resistance compared with standard fillers. It’s waterproof, compatible with basecoat/clearcoat systems, and won’t stain paints when used properly.

• Waterproof formulation prevents future undercutting from moisture.
• Excellent resistance to everyday road impact and vibration.
• Sands smooth for primer and topcoat without bleeding or staining.

Can the cured filler be modified or used for mechanical fastening?

Yes — after full cure the material machines reasonably well and can be drilled and tapped for fasteners, making it suitable for repairs that require reattachment points or custom fittings.

• Fully cured compound accepts drilling and tapping for bolts or studs.
• Holds threads better than many non-reinforced fillers.
• Permits further fabrication or trimming without crumbling.

Who is this for: Evercoat Body Shop Metal Reinforced Filler is aimed at professional body shops, restoration specialists and serious DIYers who work on vehicles, trailers, metal equipment or structures where rust, perforation or thin metal require a robust, long-lasting repair. If you need a filler that bonds reliably to aluminum or galvanized steel, withstands moisture and impact, sands to a finish-ready surface, and offers the option to drill or tap after cure, this product delivers the performance and versatility required for demanding metal repairs.