EVERESTWAY 10" 12V 80W Slim Electric Radiator Fan — Universal 10-inch Push/Pull High Airflow (800+ CFM)

EVERESTWAY's 10-inch 12V 80W slim electric radiator fan is a universal push/pull cooling fan designed to increase airflow through 10" radiators and help manage engine bay temperatures on cars, trucks, RVs, and trailers.

This compact 2.36" thick fan combines a curved 6‑blade design, a reversible push/pull configuration and a full mounting kit so you can add or replace cooling capacity on a wide range of 12V systems. Built to spin up to roughly 2400 RPM and move over 800 CFM, it’s intended for installations where space is limited but higher airflow is needed. The unit ships as a single 10" fan (puller orientation) and includes brackets and tie straps for flexible mounting options.

How does this fan fit different vehicles and radiators?

The EVERESTWAY 10" fan is made to be a universal option for any 12V system where a 10-inch diameter fan will fit. Compatibility depends primarily on available radiator mounting points and clearance, not vehicle make. It’s suitable for cars, pickups, trailers, RVs and light trucks when radiator size and voltage match.

• Diameter: 10 inches; thickness: 2.36 inches
• Designed for 12V electrical systems (standard automotive voltage)
• Includes mount brackets and tie straps for diverse mounting locations
• Best used where radiator opening and shroud space allow a 10" fan

What performance can I expect from this 12V, 80W fan?

This fan is rated at 80 watts and draws about 5–7 amps under normal conditions, reaching up to approximately 2400±10% RPM. With a maximum wind speed near 9.09 m/s and fan CFM at or above 800, it produces substantial airflow for its slim profile.

• Rated power: 80 W; amp draw: 5–7 A
• Max RPM: ~2400 (±10%) and Max wind speed: ~9.09 m/s
• Airflow: ≥800 CFM for improved heat transfer across the radiator core
• 6 curved blades tuned for efficient airflow in pull or push modes

How do I switch between pull and push configurations?

The fan ships in factory puller mode. To use it as a pusher, flip the blade orientation and reverse the wiring polarity. This reversible design gives installers flexibility for front- or rear-mounted configurations depending on radiator shroud design and vehicle airflow needs.

• Factory setting: puller (blade orientation configured for pulling air)
• To convert: flip blades and reverse electrical wiring polarity
• Works as either pusher or puller depending on installation constraints
• Consult wiring best practices and vehicle grounding for safe installation

Who is this for? EVERESTWAY’s 10" slim electric radiator fan is aimed at DIY mechanics, fleet owners, and vehicle restorers who need a high‑flow, low‑profile cooling solution for any 12V system that accepts a 10" fan. It’s also useful for retrofit or replacement projects where a compact fan and included mounting hardware simplify installation. Before purchasing, confirm your radiator opening and shroud clearance match the 10" diameter and 2.36" thickness to ensure a proper fit. If you have specific fitment questions, contact the seller with your radiator dimensions and vehicle details.